just a quick note for anyone having issues using the scanner, it must be plugged into both car and computer before launching the application. Then key on.

Can any kind soul explain the differences between

Daytime running lights EU/US1/US2?

I haven't found that answer in my searching. I assume one of them means low power highbeams...

the differernces are that i tested on my 06 us spec 3.0i
EU - uses the xenons at a lower level intensity
US1- uses xenons and turns off the angels eyes and uses turn signal lights
US2- the one i use turn on the halogens.

I'll take pics tommorow with the settings and upload it.

I also uploaded to rapid share the 64bit drivers for windows 7 for this scanner if anyone was interested.

any other questions let me know.

And for the seat memory and steering angle (LEW)we dont have that abillity to code with this scanner. Not unless you know the values.
All the reason why I am setting up a easy dis pc. just need a edibas/inpa cable.

ReCoding car with Bmw scanner
 

hello , can you send me those instructions?

[email protected]

thank you best regards

Just to let everyone know. You can find the knockoff hardware much cheaper other places. The software can be downloaded from the PA Soft website. Great tool to help diag many problems, view, clear, and read codes and airbag lights. I have the exact same thing for my e46 running on windows Vista 64bit. There is a very comprehensive thread over on bimmer formus about this. If you diy your own car this is a GREAT tool to have.

Thanks Mate, it works now.

I got ripped off by getting the ebay version, which is of course only the demo from PA soft. Should have known it was too good to be true.

I bought the full version here: BRAND NEW BMW Scanner 1.4.0 programmer | eBay

Only £25 delivered to the UK and works perfectly! :thumbup:

ask the customer service of OBD2 Diagnostics Appareils-Fabricant global d'outil de diagnostic automobile
they can help you free