Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Coolant overflow hose break (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/4875-coolant-overflow-hose-break.html)

Heather Leigh 09-05-2005 11:57 PM

Coolant overflow hose break
 
My husband and I were putting coolant in, and a hose broke. It now leaks coolant (quite a lot) and I am curious if it is safe for me to drive to a dealership or if we should have it towed. Any suggestions?

pepatrick 09-06-2005 12:08 AM

Get it towed. Tow...$100.00...new engine because it over heated....a bunch...Tow it..

vinuneuro 09-06-2005 12:34 AM

Quote:

Originally Posted by pepatrick
Get it towed. Tow...$100.00...new engine because it over heated....a bunch...Tow it..

:iagree: :iagree: Definetly not worth the risk.

bs90143 09-06-2005 03:31 PM

BMW roadside will tow it. My hose did the same thing so I had BMW come and pick the car up for me.

Heather Leigh 09-06-2005 09:17 PM

Thank you for your replies. To test how bad the leak was, we started it and drove it about 50 feet. It was gushing. Our insurance would tow it to the nearest station, but we didn't want to do that, since the nearest station has very little dealings with BMW cars. I will look in to the BMW roadside, that's a great idea, though I'm not sure if it is expired. Thanks again :)

LeMansX5 09-06-2005 09:37 PM

Make sure they have the entire X5 on truck and not just the front wheels lifted.

Juanted 09-06-2005 10:00 PM

Keep us updated, Heather, and good luck.

Juan

X5Flyboy 09-07-2005 04:07 AM

Was it one of the 2 30mm dia hoses in the back? - A previous thread mentioned these "wore out" around 50K miles - coolant seems to thin the rubber along with the heat from the engine - definitely a flatbed tow

Heather Leigh 09-09-2005 04:03 AM

1 Attachment(s)
Well, there is a part of it that is rubber, but the part that broke is plastic. My husband is out of town, so we will wait until he gets back to have it towed. He has a friend who thinks this part was supposed to be rubber, instead of just plastic. Attached is a photo of where the break is.

NBX 09-09-2005 01:30 PM

Coolant Expansion Hose
 
The same thing happened to me. I went to the dealer and got the prt for about $35 and replaced it myself - it's a faily simple thing to do. Just pull the cilps at either end and disconnet hose, then isntall new one.

Good Luck.


All times are GMT -4. The time now is 01:52 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.