the fuse is most likely blown for the passenger door module. replace the fuse, and check the mirror motor for shorted wiring

I just looked at the fuses couldn't locate passenger door module fuse in glove box. Is there an alternate spot besides the trunk

Mine had back driver side button broken and I changed it. However in the other new unit, drivers side windows wouldn't go down unless I press on the unit itself. Today I replaced it again and this time its all good, except this one has (extra for me) mirror folding switch on it. all for free :)

I saw the pdf and diagram, but does anyone have pics? The busted passenger door is annoying!

The diagrams are usually interactive, if you click on the fuse it tells you the number ans shows you location.

Old thread. Any resolution to this problem? I replaced the pass front door lock mechanism because the plastic frame had broken holding the inside door latch cable................Lock only works manually. Window works, only at the door.
Any help (fuse location, reset technique etc) appreciated.

Did the window issue only start after replacing the lock? If so, check the connections to the passenger switch module (which you would have unplugged to repair the lock). If the window works from the button on the passenger door module but not from the drivers side door module the problem is a data connection issue and not likely a fuse.