Hi mtx5, still waiting for your instructions to make the angel eyes work, thanks.

Dolphin.....I have become an expert in this area with aftermarket HL's......MTX5 will tell you as I have helped him.........

if you want to give me a call let me know and I could pm you with my contact info....I will be happy to help you......I have a few questions for you that i'll need answered,but that should be it....

:)

RR

Sorry for the delay:

You first need a power supply, my wiring called for the ECU to be the power supply. You need a relay to be mounted close to the power supply. You also need a fuse.

The thing is, my lights dont use that plug to power on the angel eyes, they use a different one. So you might need to change that plug or get the right piece to fit that plug.

These were my instructions. Hope it helps:

http://i395.photobucket.com/albums/p...2007x/mail.jpg

KEY:

1. Relay - to be mounted close to the power supply

2. Fuse-last item to be installed, so remove from socket first

3. Power Supply- connect to positive terminal of battery (engine bay)

4. Ground - i mounted mine where the hood's ground connection is

5. Brown wire - goes through the fire wall into the footwell light, connect to the blue/red strip color wire of the light assembly connection, Just to elaborate, the footwell connection is so your new eyes illuminate when you hit the remote button open, lock or even to open the trunk.

6. Connect to ballast#1 there are different wire color sets for the ballasts/harness for this, so i just did trial and error!( ex. if A to A and B to B dont work, then it should work A to B and A to B) and success was achieved

7. pink wire- connect to ECU ( look for white/red strip color wire) so AE on when key position is "on" the wiring will be different from the 3.0 and 4.4, ( the red/white strip wire is the third wire from the left on the black socket connector for the 4.4-see pic) ( for the 3.0, it is located differently-i think its on the 2nd row--so just look for it)

8. Connect to ballast #2


Hope this helps. If not Rich might be of more help to you.

Hey Dolphin,
is this plug next to the high beam is the plug for Angel Eyes? Looks like I have it too on the lights I just received...just wanted to confirm

those are beautiful headlights@! it looks like facelift lights on non-facelight e53.... sooo nice... which seller on ebay did u get it from?

Question? has anyone replaced the '00-'03 light switch with a '04-'06 light switch when retrofitting angel eyes?

I've also noticed how scratched up my headlamp clear plastic is. Plastic polish only goes so far. Are new assemblies the only way to "clear" up the problem?

couldn't you just make a Y splice with 2 hella adapters like E39 retrofits?

Hi Philly, yes that's the plug for the AE's...did you installed them yet?

Hey Chigga, the sellers are TRENDGEAR or PARASITE SINGLE...they both sell the same headlight...good luck!