Excellent writeup.
Im waiting on response from administrators because my screen is also redrawing every few seconds.
Jsears: Do you happen to know if the download formware will work on a mac computer?

No it won't. The "Downloader Tool" that is used to upload the firmware to the Intravee is an .exe file so it won't run on a Mac unless you run VMWare Fusion/Parallels or Boot Camp.

Thanks

any computer savvies out there?

Microsoft Certified and a Mac owner! :confused:

Intravee Update
 

Any computer experts out there?

Im trying to update the firmware on my intravee, but according to bimmernav I need to change the COM port in my laptop which is running Vista Home.
I cant find the Com Port under device manager.
Any input will be appreciated

Cant find the COM port under device manager on my Presario running Vista Home

1. Go to Device Manager (Control Panel -> System and Maintenance -> System, and it will be listed on the left under "Tasks" )
2. Click "Continue" when the pesky UAC pops up. :-(
3. Double click on "Ports (COM & LPT)" (note that this will only show up when connected to the command module!)
4. Double Click on "USB Serial Port (COMx)" (where x is the COM port currently assigned)
5. Click "Advanced" on the "Port Settings" tab
6. Change the assigned COM port, and click "OK" all the way out ...

Help!!!!

1. Go to Device Manager (Control Panel -> System and Maintenance -> System, and it will be listed on the left under "Tasks" )
2. Click "Continue" when the pesky UAC pops up. :-(
3. Double click on "Ports (COM & LPT)" (note that this will only show up when connected to the command module!)
4. Double Click on "USB Serial Port (COMx)" (where x is the COM port currently assigned)
5. Click "Advanced" on the "Port Settings" tab
6. Change the assigned COM port, and click "OK" all the way out ...