How to remove interior door handle ?
 

is there a factory direction to remove the interior door handles front and rear? My door handles are worn out on the side with probably nail scratch and just ordered the handles. do I need to open the whole door trim?

I cannot tell you 100% for specifically changing the door handles but i do no to open the doors interior side there are 2 sorta hidden screws. One of them is hidden behind a small cap under the doors handle and the other one is behind the interior trip cap, you need to sorta pop it out with a screw driver and then your going to see the screw.

Sorry if i couldn't be much of assistance....

good luck! =)

to change doo handle,l you haev to remove door panel.
Try search to find "how to remove door panel".
There is 3 screws: under wood-titanium trim (remove carefully), under airbag clip and above a pocket. than pullout a panel with flat screwdrive, begin from buttom

thank you so much

snkpkp, can you please advise part no.s for door handles as both my driver and passenger handles are very scratched from previous owner and I would also like to replace. Please post how you went so I can learn too :)

You guys aren't talking about the long silver top covers for door pullers are you? Those pop right off without taking the whole car appart. I recently repainted mine without buyng new ones and they look great.

Hi Artriga, the part on mine that is scratched is the black handle the top cover attaches too. It has a "rubber" feel to the paint and that has scratched off due to rings etc.

I see, well those you do have to take door panel off. Or... mine were schrached to the point that the rubbery layer was nearly gone, so I rubbed what was left of it off with a strong cleaner and my own elbow greese.
Now they are all shiny and black.

DOOR HANDLE FRONT LEFT BMW PART # 51418265077*
DOOR HANDLE FRONT RIGHT BMW PART # 51418265078
DOOR HANDLE REAR LEFT BMW PART # 51428265173
DOOR HANDLE REAR RIGHT BMW PART # 51428265174

pls note these part numbers are for Black interior !

Thanks snkpkp!! Good luck with the install.