HELP - car asking for CODE after pulling cluster
 

i pulled my cluster for the first time since retrofitting NAV in my 2004 X5 and my car won't start!! asking for a CODE in the NAV screen. HELP!!!!

did a quick search. can anyone help?

- :wow: :wow: :wow: :wow: :wow:

try 0000

i tried that.

there are "deactivate" and "change" selections under the code entry. neither will work, or let me into them. pretty nervous as my nav unit did not come with the car, thus, no code paperwork.

If 0000 does not work as Philip suggested,

1. disconnect the battery for 1 minute
2. reconnect the battery, alarm will be blasting for about 45 sec
3. turn key to the second position
4. a 15 minute count down should be activated in display
5. at the end of the 15 min. count down, you should be able to start the X

There may be more detailed instructions in the owners manual.

GL, Rob_

Yes, I recall reading information about this procedure in the NAV manual. What you just mentioned seems similar. Do non-nav vehicles come with the code feature?

so i followed your instructions, and an "emerg. deact." countdown showed up in the display, along with the code blanks. the countdown has always been frozen at 9.59. do i need to try all zero's again before the code will start to countdown? did your countdown move?
key is in position 2 and i'm just going to leave it for awhile.

so car is now at dealer.......following the tips in the manual did not work for me.

yes if you have the premium package which comes with the on board computer feature :)

Code Issue
 

Hello,

What ever happened with your cluster and the "Code" issue. I am having the same thing going on right now...

Any advice for me?

Oh no, i have the same problem... :( !