Xoutpost.com - Rain sensor

Page 2 of 2

Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Rain sensor (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/88170-rain-sensor.html)

TiAgX5

07-13-2012 10:17 AM

Quote:

Originally Posted by Bargain Bucket (Post 885775)

Cool. So how do you disconnect it (i.e. where is the connector and how do you get to it)?

The plastic cover behind the rearview mirror needs to be removed, the cover snaps apart. There's a small wire connector that needs to be unplugged from the sensor module. 2 min job.

TiAgX5

07-13-2012 10:20 AM

Quote:

Originally Posted by rogerkiu (Post 885781)

The best solution is to replace the whole windshield, this is what BMW service center's solution. However, you can buy the BMW specific glue to re-attach the sensor onto the windshield, but it will be really difficult to do it without letting air goes into the area as long as the windshield is not off.

Drop some big $s (king kong dollar?), and toss a good windshield in the trash to keep an option that is intolerable to many owners? See above response!

diyanich

07-13-2012 01:21 PM

I honestly don't give a thing about rain sensor itself,I just want to be able to adjust the wipers to desired speed,I hate a dry windshield wiping.Gets the rubber spent fast and wipers don't perform as good too soon.
But I also question myself,WHY every single thing is done so freaking complicated?

Quote:

Originally Posted by TiAgX5 (Post 885814)

Drop some big $s (king kong dollar?), and toss a good windshield in the trash to keep an option that is intolerable to many owners? See above response!

Bargain Bucket

07-17-2012 02:02 PM

Quote:

Originally Posted by TiAgX5 (Post 885813)

The plastic cover behind the rearview mirror needs to be removed, the cover snaps apart. There's a small wire connector that needs to be unplugged from the sensor module. 2 min job.

Many thanks.

patrickkc

07-17-2012 04:37 PM

I just want the rain sensor to work so I can have my auto lights back. Right now, if I put it on Auto, the headlights turn off after 15 seconds.. even if it is in the dark..

zonefive

06-23-2013 10:37 AM

I just had my windshield replaced and the rain sensor doesn't work. The intermittent function just turns the wipers on at normal speed.

The guy who replaced my windshield broke the plastic surround but used some adhesive to put it back together, and I thought no big deal if it works.

I watch him put the rain sensor on the windshield and he didn't use any silicone or adhesive. Is this normally part of the process?

I looked at the windshield and I don't see any bubbles underneath the sensor. How do I troubleshoot or do I just need to bring it in to the dealer?

All times are GMT -4. The time now is 07:59 AM.

Page 2 of 2

Show 200 post(s) from this thread on one page