If only the indians could have killed all those intruders who trespassed on their property/land and suddenly claim it as their own. Thieves and criminals should be treated equally, no matter which century...one to the dome.

Do you red and modify through just ncsexpert? because i use ncsdummy it shows translations and everything, i search for the FL and nothing shows up. no results at all. maybe you are right about yours being newer though...

i use NCS, pull the file from a module, load it in to BMW coding tool, modify the lines that I want to, fire up the NSC again, load the newly created file into the module...

you MUST have something in LCM with FL - FL is high beams and you sure have high beams in your car... when you search for the FL in the Coding Tool, search for ANY occurrence... you should have several instances of FL...

FL - HIGH BEAMS (L-LEFT; R-RIGHT)
NSW - FRONT FOG LIGHTS (L-LEFT; R-RIGHT)
AL - LOW BEAMS (L-LEFT; R-RIGHT)
BL - BRAKE LIGHTS (L-LEFT; R-RIGHT; M-MIDDLE)
BLK - TURN SIGNALS (LH-REAR LEFT; LV-FRONT LEFT; LZ-SIDE LEFT; RH-REAR RIGHT; RV-FRONT RIGHT; RZ-SIDE RIGHT)
KZL - LICENSE PLATE LIGHTS
NSL - REAR FOG LIGHTS (L-LEFT; R-RIGHT)
RFS - REVERSING LIGHTS (L-LEFT; R-RIGHT)
SL - PARKING LIGHTS (H-REAR; V-FRONT; LH-REAR LEFT; LHI-REAR LEFT; LV-FRONT LEFT; RH-REAR RIGHT; RHI-REAR RIGHT; RV-FRONT
RIGHT)

I do exactrly all of that! and whoa ok i loaded the trc file from yesteday tried looking for it again and i found th PWM_FL_BIX set at value 2... ok and now i find GPS UHR.. WTF?? i swear it wasnt there yesterday..

Will hook up laptop to car again and load new trc file and try again later..

UPDATE: so i go to the car.. Do the ncsreading select LCM, it says LCM.c20 or so before i press button to do the reading codieron lessen. when i do that it changes to LCMc.21... doesnt really matter right cause ive coded everything else and it worked...

Open up Coding tool.. load trace and do the serach both for gps and BIX and NOTHING, no results!??? whats going on?

this feels like a "twilight zone"!!!!

if you saw it at one instance that you have the FL and UHR codes, that means they are somewhere there, otherwise - why would you see them?... since you don't see them now, you might have done something slightly different this time...

are you reading ALL modules at once?

try to read one module at a time and see what you have... while i am not sure that the GPS clock is in the NAV module, the highbeams must be in the LCM...

Do it again

I read just the LCM and both those options are supposed to be in there. ill keep trying.. hopefully i dont mess something up and the airbag brows my laptop into my face...

maybe ill make a video of my problem

Video of airbag in your face???

This is what I call entertainment!!!


:popcorn:

All jokes aside, keep us posted..

44. outside mirrors to fold in on engine stop, fold out on ignition start, manual operation to be retained, as per this post - Xoutpost.com - powered by BMW X-sav Enthusiasts!

thanks to DPBAYLY for research and creation of the working system

That's a lot of folding and unfolding. Don't you think you'll wear out the motors and the henge/spring?