Xoutpost.com - kW coilover install?

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - kW coilover install? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/96551-kw-coilover-install.html)

Quote:

Originally Posted by DSSA (Post 1035454)

^^. That's Great deal for a new set!

Under dealer cost.

Isn't the warranty non transferable? So I wouldn't expect to get any sort of service from KW after buying them second hand, although new.

Quote:

Originally Posted by Joshdub (Post 1035455)

Isn't the warranty non transferable? So I wouldn't expect to get any sort of service from KW after buying them second hand, although new.

While true, you're also not likely to get dealer cost on them. MAP pricing on the V3s is $2799.99.

On top of that, find out how long you get to wait to get them when KW is out of shelf stock. Currently they have 1 set in stock.

Quote:

Originally Posted by D Unit (Post 1035302)

Any chance getting the required parts numbers for a 4.8is too? To be honest, I'm not sure what else I would need if I purchased the BC coilovers.

Hi.

when fitting KW V3's you need the following parts:

01 Guide support 31306779604
03 Plate 31331096068
04 Self-locking hex nut 31106774714
05 Protection cap 31331090616
06 UPPER SPRING POCKET W/AXIAL CAGE BEARING 31331090612
07 SPRING PAD UPPER 31331091233
08 Support 31336780245
09 Additional damper (bump stop) 31336751594

Taken from the following link: RealOEM.com * BMW E53 X5 3.0i GUIDE SUPPORT/SPRING PAD/ATTACHING PARTS

Rears you do not require any additional parts as I believe the BC's have the rear spring round the damper body like the front setup. For the KW's you need the upper spring perch.

But I believe the BC's come with the upper spring perch etc so you may not need no7. Until you get the coilovers or someone can chime in with what comes with them I'm just guessing at the upper spring perch.

Quote:

Originally Posted by Mr.Wrong (Post 1035330)

In these two pictures is it set at the highest setting by any chance or is there more room to dial up height?

In all fairness that was fairly close to max height. There really wasn't much higher you can go from there.

Quote:

Originally Posted by RajB (Post 1035469)

RajB Knows BMWs!!! Thanks again RajB for all of your very helpful info. :bow::bow: