Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   kW coilover install? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/96551-kw-coilover-install.html)

slickdaddy 03-31-2014 04:43 PM

kW coilover install?
 
Anyone ever install a set of kW coil overs on a 4.6is? Is there anything special when swapping out the rear air shocks? Or a diy?

RajB 04-01-2014 11:12 AM

Quote:

Originally Posted by slickdaddy (Post 988189)
Anyone ever install a set of kW coil overs on a 4.6is? Is there anything special when swapping out the rear air shocks? Or a diy?

I've done a few sets to the 4.8is but is in essence the same.

You just need the rear upper spring perch from BM. If you have full air suspension then you need a few more bits for the fronts too.

I'm selling a set of KW's if you are looking for a set.

04e53x5 04-01-2014 12:34 PM

Quote:

Originally Posted by RajB (Post 988322)
I've done a few sets to the 4.8is but is in essence the same.

You just need the rear upper spring perch from BM. If you have full air suspension then you need a few more bits for the fronts too.

I'm selling a set of KW's if you are looking for a set.

What are you looking to get for them?

RajB 04-01-2014 12:51 PM

Quote:

Originally Posted by 04e53x5 (Post 988351)
What are you looking to get for them?

Was thinking if about $1500 plus shipping. Shipping could be expensive to the States but could come to an agreement over the combined cost.

pnoyako85 04-01-2014 06:04 PM

Quote:

Originally Posted by RajB (Post 988353)
Was thinking if about $1500 plus shipping. Shipping could be expensive to the States but could come to an agreement over the combined cost.

I lik the Price!!! paypal payments welcome?:stickpoke

RajB 04-01-2014 06:17 PM

Quote:

Originally Posted by pnoyako85 (Post 988443)
I lik the Price!!! paypal payments welcome?:stickpoke

I've been bitten before with PayPal and shipping items overseas and people doing chargebacks etc once they have the item. Prefer bank transfer but I can possibly get this done through CA Automotive here in the UK so you would in essence be buying them from CA Automotive. How does that sound? I'd have to enquire if it's possible.

RajB 04-01-2014 06:21 PM

Here's some pics etc of my fitting of the KWs to my own 4.8is:

So onto the coilovers.

This is how the OSF looked to start with with a blown airbag:
http://i2.photobucket.com/albums/y15...5/DSC_0017.jpg

The old setup:
http://i2.photobucket.com/albums/y15...DSC_0025-1.jpg

And finally removed:
http://i2.photobucket.com/albums/y15...DSC_0026-1.jpg

Always nice when you get a present to open:
http://i2.photobucket.com/albums/y15...5/DSC_0032.jpg

This is some serious kit. Fully adjustable, Height/Compression/Rebound:
http://i2.photobucket.com/albums/y15...5/DSC_0036.jpg

Old with the new:
http://i2.photobucket.com/albums/y15...5/DSC_0038.jpg

Front installed:
http://i2.photobucket.com/albums/y15...5/DSC_0041.jpg

Now, onto the rear:
http://i2.photobucket.com/albums/y15...5/DSC_0043.jpg

The rear airbag once removed:
http://i2.photobucket.com/albums/y15...5/DSC_0042.jpg

The rear adjustable spring perch:
http://i2.photobucket.com/albums/y15...5/DSC_0044.jpg

All in and replaced:
http://i2.photobucket.com/albums/y15...5/DSC_0045.jpg


After a decent clean this is how the X looks (finally air suspension free):
http://i2.photobucket.com/albums/y15...5/DSC_0058.jpg

http://i2.photobucket.com/albums/y15...DSC_0059-1.jpg

May not look very low but it will settle further and tbh it is a a 4x4 at the end of the day.

It's basically sat where the lower air suspension setting would be, which is fine by me.

Last job now is to get the air suspension coded out.

itscoo2pyopants 04-02-2014 12:33 AM

^ looks good. Do you have a part list of everything you needed to fit you. 4.8 is?

1500 is a heck of a deal. New cost is more than double that

RajB 04-02-2014 01:54 AM

Quote:

Originally Posted by itscoo2pyopants (Post 988517)
^ looks good. Do you have a part list of everything you needed to fit you. 4.8 is?

1500 is a heck of a deal. New cost is more than double that

Yeah I could find the part numbers and provide them.

RajB 04-02-2014 01:55 AM

Quote:

Originally Posted by itscoo2pyopants (Post 988517)
^ looks good. Do you have a part list of everything you needed to fit you. 4.8 is?

1500 is a heck of a deal. New cost is more than double that

Yeah I could provide the part numbers.


All times are GMT -4. The time now is 02:24 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.