Ill check this out on mine when I get home tonight. Thanks. Good info. Looks like you need to remove the front bumper to get to these things. Bummer.


Sent from my iPhone using Tapatalk

Confirmed with the click-test. It's the front outer right as was suggested. I felt like a bat as I sat on my hands and knees sticking my ear against each sensor.

Now - I see two apparent styles of sensor. One looks like it's offset 90 and the other looks more straight. Which one is this?

Reaoem isn't helping too much here. I see in 66-05 something that looks like the rear of the car and sensors there but nothing that describes the front of the car.


Sent from my iPhone using Tapatalk

The straight ones are for all 8 sensors including the front outer corners on pre-facelift 00-03 (all 8 sensors are the same p/n) and the 90 degree offset ones are for the front outer ones on the facelift models 04-06. The other 6 on the facelift models are the same as the pre-facelift.

Gotcha. Thanks! I'll order a 66206989068


Sent from my iPhone using Tapatalk

Did mine this morning - easy-peasy. It took maybe an hour start to finish.

PDC system works again!!

Pics or it didn't happen. Removed all fasteners and just popped the bumper skin loose and let it rest on a cardboard box.



http://tapatalk.imageshack.com/v2/14...1d09a46bcd.jpg


Sent from my iPhone using Tapatalk

Good to hear you got it back up and running. Bumper removal is very easy!