| crystalworks |
09-06-2016 01:00 PM |
Quote:
Originally Posted by THATDONFC
(Post 1028919)
Ok guys, the write up is finally complete. Look over post 1 and this should give you all the info you need to get the job done. Please let me know if you see and errors or have any suggestions!
|
Surprised nobody commented on this. Nice work.
Just wanted to thank you for the PDF's. My LCM has a failure on the left low beam circuit and this should make it much easier to find a workaround to get it to trigger (using a relay) from the right low beam output of the LCM. |
