Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   Right two-stage brake lamp! Warning fixed (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/105601-right-two-stage-brake-lamp-warning-fixed.html)

bushranger 01-23-2017 02:59 PM

Right two-stage brake lamp! Warning fixed
 
Hi everyone. My X5 was telling me that the right two-stage brake lamp was out, but when I checked the bulb it was clearly fine. I cleaned the bulb socket contacts with fine grit sand paper and reinstalled. Warning went right out and hasn't come back. Thought I'd share in case anyone gets this error.

https://uploads.tapatalk-cdn.com/201...c887704aa6.jpg



Sent from my iPhone using Tapatalk

Nanniepoo 01-23-2017 04:07 PM

Actually this just popped up last week, albeit for the left side. Off the next couple drives, came back for one more, and has been off since. I'll keep this in mind if it sticks around.

bushranger 01-23-2017 04:16 PM

Let me know how it goes. Might not be a bad idea just to clean up those contacts a bit anyway.


Sent from my iPhone using Tapatalk

aureliusmax 05-12-2021 03:17 AM

Quote:

Originally Posted by bushranger (Post 1099871)
Hi everyone. My X5 was telling me that the right two-stage brake lamp was out, but when I checked the bulb it was clearly fine. I cleaned the bulb socket contacts with fine grit sand paper and reinstalled. Warning went right out and hasn't come back. Thought I'd share in case anyone gets this error.

https://uploads.tapatalk-cdn.com/201...c887704aa6.jpg



Sent from my iPhone using Tapatalk

I'm getting this same message from the idrive from my 2007 E66;
right brake lamp
right two-stage brake lamp malfunction

Today I removed and inspected the bulbs and sockets today and couldn't find anything usual with corrosion. Even with the brake check I didn't see any bulbs out. I read someone on another forum say these bulbs only light up with the ABS system activated in slippery braking conditions??
I'm going to try the sandpaper, some grease and see what happens ! I will report the update.

wogboy_9000 05-12-2021 06:37 PM

Worst case scenario you can deactivate the feature via NCS Expert.

aureliusmax 05-13-2021 04:15 AM

On second inspection there was no corrosion but it seemed like at the contact points there was a little bit of black discoloring on the contacts, probably some minor oxidation of the nickle plating. so i used a diamond file and dab of D100 to the contact points and the error message hasn't returned :D

The problem started two weeks after removing and reinstalling the bulbs for some work I was doing replacing the rear boot lid open button called the rear grip strip.

SF2000x5 05-14-2021 12:05 AM

Going to have to take a look at these contact points. I’ve had the warning lamp on for months no but the brake lamps seem to work.


All times are GMT -4. The time now is 09:00 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.