Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   e70 2007 trailer hitch coding (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/110087-e70-2007-trailer-hitch-coding.html)

nikolay 04-07-2019 01:27 AM

e70 2007 trailer hitch coding
 
1 Attachment(s)
Hi. I'm using the OEM hitch kit and OEM wiring. I Added +AHMU to the FA for both CAS and FRM with NCS expert ,but when i try to the codding i am getting error : COAPI 2020 ECU does not answer IFH-0009. No response from controlunit AHM_E65


blue dragon 04-07-2019 10:57 AM

HKL
SCH_FBD
aktiv
SCH_TOEHKI
aktiv
TASTER_FBD
aktiv

FRM-
LWR_STROM_HALT
wert_01
LWR_STROM_NORMAL
wert_01
LWR_STROM_RAMPE
wert_01

KOMBI
AHM_APPL_MONITOR
aktiv

RPDC
ANHAENGERKUPPLUNG
aktiv
AHK_OFFSET
offset_1
AHK_AUSBLENDUNG
aktiv

CIC
MACRO_TRAILER_COUPLING
aktiv



AHM
AENDERVARIANTE_AHM
us
CCMELDUNG_ABRISS_AHV
cc_04bh
CCMELDUNG_FEHLER_AHM
cc_04bh
CCMELDUNG_VERRIEGEL_AHV
cc_04bh
START_CCM
klemme_15
TYP_AHV_SG
keine_ahv
SL_BEI_KZL_AKTIV
nicht_aktiv


Did you connect the AHM module that comes with the the OE wiring harness?

Purplecty 04-09-2019 08:21 AM

Are these the differences in each of the listed modules after retrofitting the trailer?

Sent from my SM-N960U using Xoutpost.com mobile app

Badsmerf 04-09-2019 01:41 PM

Do you see AHM in FA and CAS? Looks like BD gave you a nice list of all the modules that need to be coded. My AHM didn't come with all the lines, so I had to add them and the command myself to make it work.

nikolay 04-10-2019 01:24 AM

1 Attachment(s)
I forgot to plug the 3-pin BUS connector from the trailer wiring harness .Now i can connect with AHM module . I went true all the trouble to install ISTA P to find out this. But when i try to do the codding with ISTA P it is making me to do all kinds of updates and I was waiting 1+ hours and i just stop it because my battery was dying. I am going to use the NCS expert and do it manually .



I dont have HKL module(because i dont have lift gate option) and in my FRM module I cant find :LWR_STROM_HALT
wert_01
LWR_STROM_NORMAL
wert_01
LWR_STROM_RAMPE
wert_01

To make my lights work do I just need my AHM module programed ?
My CCC is red because i did CIC conversion

blue dragon 04-10-2019 06:32 AM

Skip the HKL step, I included it in error

E70X5M35i 04-05-2020 10:22 PM

Quote:

Originally Posted by nikolay (Post 1159344)
Hi. I'm using the OEM hitch kit and OEM wiring. I Added +AHMU to the FA for both CAS and FRM with NCS expert ,but when i try to the codding i am getting error : COAPI 2020 ECU does not answer IFH-0009. No response from controlunit AHM_E65


I am also getting the same error when trying to read the AHM ecu module. I believe I successfully added it to CAS & FRM and it shows up as an ECU module after adding it but when I go to read it, I get those same error messages.

Do I have to purchase the OEM wiring harness and install this if I want to read the AHM module? I haven't done that yet.. is that why I'm getting the message?

blue dragon 04-07-2020 08:25 AM

The OE harness comes with the module. You can't code it if it isn't physically connected to your car :)

E70X5M35i 04-07-2020 08:30 AM

Understood. Appreciate the response blue dragon! Thanks for your work and others in figuring out which settings need to be coded in order to add a hitch. I saw this thread and others in trying to figure out exactly which settings need to be coded.

I ordered the harness yesterday. Hopefully in 1-2 weeks time, I’ll have the harness and hitch installed :). Love your X5 btw — looks awesome!

Laecaon 06-16-2020 09:33 PM

I think I am missing something. 08 E70. All wired up. I did manage to add +AHMU to the CAS and FRM with NCS Expert, and the AHM module shows up now. But its missing code(only has 2 options). And FRM is missing the LRM_STROM_*** codes.

Blue Dragon, it appears you posted CIC codes, do you have CCC? I dont have a RPDC module, but I do have PDC (which I am assuming controls front and rear).



And while I have managed to use NCS Expert to alter code on both this E70, and a E46 before, I have never added code. It is as simple as pasting in code in the right format?


Thanks guys for any help. I guess this is me not understanding NCS Expert enough.


All times are GMT -4. The time now is 08:22 AM.

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.