Xoutpost.com - Aftermarket Exhaust Tips

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)

- - Aftermarket Exhaust Tips (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/70031-aftermarket-exhaust-tips.html)

I found these which are basically the same as I have now, but 1.4 inches shorter so they will sit in further:

03-08 07 06 05 04 2003 2008 EXHAUST TIP porsche CAYENNE

I haven't been able to find the GTS tips online yet, but Im betting they are a few hundred $'s just because I had a cayenne-s, and everything for porsche is over priced. I do like the dual wall, but I haven't found any that slant down like the oem's.

^
Do I smell group buy? I'd be interested in changing out my tips.

Quote:

Originally Posted by BGReddy00 (Post 707716)

If you can post a picture of your setup, and what brand\info if you got it!

I recently put the Magnaflow 35168 it looks much better then the stock singles, but I had the same problem everyone else has had. The muffler shop cut the pipes, spot welded, but they still stick out too far.

MagnaFlow Performance Exhaust

http://images.magnaflow.com/02product/parts/35168.jpg

I am looking for something shorter, a bit wider as these also don't fill the whole space, dual tips, and pref black so they don't need to be painted..anyone with an idea please post as well!

The current specs of the magnaflow are:

Material: 100% Stainless Steel - Mirror Finish
Diameter: 3in.
I.D. Inlet: 2.25in.
Length: 10in.

I have the same Magnaflow tips and I agree, they do stick out a little more than they should. My installer also cut the exhaust pipe and fabricated a new one to weld these tips to the muffler. However, I think I may have an answer to your problem: http://www.xoutpost.com/bmw-sav-foru...-next-mod.html
Check out post #31. providenceleaf found these tips that are dual wall, staggered and short enough for X5! :)

The supersprint tips look great, but I just checked out the pricing and it is insane:

MSRP $1,139.33
Your Price: $843.95

I did see some of those other tips, but from what I've seen on a few other X5's as well as looking at the ones I have now the best fit would be a 3"x3" diameter on the each tip with a total length of 6-8" max. 6" would be flush ideally with the bumper

The magnaflow's are 10" long so theres no way on the ends to cut them down enough also the tips each measure 3" wide x 2.5" tall. Also I think I'm going to search for stainless steel tips what I've read and seen in person its very easy to spray black engine enamel to paint them black. Finally the inlet shouldn't matter as all of these have to be spot weld.

I found these tips on ebay today, but it's so hard to tell the actual length by pictures. These are 3.5 instead of the 3 like magnaflows and are single instead of dual wall I think painted black they could look good? The only concern I have with these is theres little room to cut them down at the spot weld, and they could be too long as the seller states the total length to be 10.25"

DUAL EXHAUST TIPS STAINLESS STEEL 2.5" ID 3.5" TIP : eBay Motors (item 310195980716 end time Feb-20-10 08:58:01 PST)

http://www.streetimports.com/uploads/tips2.jpg

I went ahead and measured the magnaflows today..

-The actual dual pipes itself before they are merged together its 5.5"
-The total length from the part where its welded to the existing pipe is 8" this was cut down from 10"

What do those led rods look like in the daytime?

Do you have a side view I'd be interested to see how far they stick out..Also those are the same size as mine I think I need a bigger tip...

I think I finally figured out the best solution today after looking for a few weeks now.

As you will see the Porsche Carrera-S tips are short and wide, so they should work well. I just have to try, and find them at a reasonable price.