Hi my friend!!

Pls, could you give us the lookup file??

I don't undesrtand how can I change the code you are telling.

I need the lifetime code for EUROPE WEST PREMIUM for CIC.

Thank you and kind regards from Spain.

;)

Or where can we learn to modify the file??

;)

HKL coding
 

anyone has any idea why i cannot code HKL do this below, as soon as i do write (SG_Codrien) i get an error..

i successfully coded everything in this post (FRM, CAS etc)"http://www.xoutpost.com/849032-post6.html " but i cannot make the trunk close using FOB..

error below

http://img903.imageshack.us/img903/3001/oAxxC6.png

Try it with the ignition on (car not running though)

stupid question but how do you do "ignition on" in E70? ive coded everything successfully (CAS, FRM, CAPPL etc) with the Key inside and car not running.

only fails in HKL.

also anyone know the value on what to change in triple blink? im assuming its in "FRM" module and i want to change it from 3 (value right now set in i drive) to at least 5 or 6.

Push the button without your foot on the brake

Key on, engine off as mentioned do not put your foot on the brake when you push the start button.

Although I had thought about wanting to start the engine without the brake on, I sometimes think is may be better to have the brake required to start the engine for easy Key on, engine off situations.

I guess if there was a delay on pushing the start button before the engine cranked, this may be a useful way to start without applying the brake, but this may confuse some people that would need to drive the car that expect the engine to immediately crank.

I guess the best case situation would be foot on the brake, push the start button as normal with the additional option of no foot on the brake to start the engine with a 2-3 second delay while pushing the start button.

:doh: it works. thank you..

After a few years and some help of members, I was finally able to code my car. Initially, I used the Carly app for some coding, but realized that Carly doesn't do everything so I bought a proper cable and hunted down the files. Took a few days and some frustration, but was finally able to get it to work!