Successfully coded my E70
 

Coded:
1. Windows up / sunroof close with keyfob
2. Mirrors fold on lock with keyfob
3. Disable annoying iDrive disclaimer
4. Hazzard double blink (instead of flash, pause, flash pause, its now flash, flash, pause, flash flash, pause)
5. Foglights active with high beams
6. Corner light delete
7. Digital speedometer (Even though I already have HUD)

I still have to code the trunk close from the button inside and also the keyfob.

Awesome. Its something I'm looking into when we get ours.

how did you do it?

With a $70 Ebay cable, and software thats available here
Getting Started with Coding your car

Start reading :thumbup:

Pleeeeeaseee!!!!! Post a write up on how exactly you did it, for those of us who are not too technically inclined.

Its already in that thread, there is a pdf guide on using the INPA and NCSEXPER software.

The list of values that you change is below, along with the modules that you have to change them in.

================================================== ==============

Disable Sidemarker
FRM Module
SIDEMARKER_US
nicht_aktiv

================================================== ==============

Double Blink Hazards (some thing cool looking)
FRM Module
DOPPELBLINKIMPULS_WARNBLK
aktiv

================================================== ==============

Key fob remote mirror close (this has a dependency with remote window close, for this to work i thing remote window close should be coded as well)
FRM Module

ASP_KOMFORT_EINKLAPP (MY09-11)
aktiv
SPIEGEL_KOMFORT_EINKLAPP (MY07-08)
aktiv

================================================== ==============

Fog lights with Highbeam on

FRM Module
FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv
Fog lights with Highbeam Flash
LH_UND_NSW_NICHT_GLEICHZ
nicht_aktiv

================================================== ==============

Key fob Windows UP when press and hold the lock button

CAS Module

KOMFORTSCHLIESSUNG_FB (window up through key fob)
aktiv
KOMFORTSCHLIESSUNG_PA (window up through comfort access)
aktiv

================================================== ==============

Eject Keyfob with engine off - you have to HOLD the start/stop button. This in conjunction with the nest feature as well
Press and hold the start/stop button 1 second. Key will be released.

CAS

KOMFORT_EJECT
nicht_aktiv -> aktiv

at the same time it will Unlock doors when engine off/key ejected - as above, HOLD the start/stop button. I don't even press the park button. I come to a complete stop, then hold the start/stop button. It puts the car in park, ejects key (if its in there, i have CA), and unlocks door (no more 2-pull to open doors)

CAS

ER_KEYOUT_AUTOVR
nicht_aktiv -> aktiv

================================================== ==============

Remote trunk close (closing tailgate with key fob and button inside cabin)
HKL Module
SCH_FBD
aktiv
SCH_TOEHKI
aktiv
TASTER_FBD
aktiv

(I have not done it yet, it is on my list)
================================================== ==============

enable DVD in motion For CIC

frist you need to modify the CIC.xxx on line 17 and 18 from [03] to [FF] using data2txt and then code the following
CIC Module
VIDEO_NUR_MIT_HANDBREMSE
nicht_aktiv
SPEEDLOCK_X_KMH_MAX_C0E
3_kmh
SPEEDLOCK_X_KMH_MIN_C0E
3_kmh

(I have not done it yet, it is on my list)
================================================== ==============

V=Digital Speed (you will have to reset the time after)
KOMBI Module
BC_DIGITAL_V
aktiv

There is one more feature that i can not confirm but others report that the following arameter show the actual speed on the V= instead the same as the speed shows on the cluster
BC_DIGITAL_V_KORREKTUR (i did not do this one i only did BC digital_V)
aktiv

================================================== ==============
Instant MPG (Value is Not in 2011 E70, may be in other/older models this value is present)

KOMBI module
DIGITAL_KVA
aktiv

================================================== ==============
Disable iDrive Disclaimer

CIC Module
LEGAL_DISCLAIMER_TIME
kein_ld


================================================== ==============
Remove IDrive warning when starting the car. (this is for CCC units)

CAPPL

LEGAL_DISCL
aktiv -> nicht_aktiv

================================================== ==============

DVD in motion (I think this is for CCC units)


CAPPL

VIDEO_DENY_C0B
deny_stop_break -> deny_never

================================================== ==============

I wonder if it allows to activate sirius

WIll this work for X5M?

^^ Yes, it will.

I did most of those too mainly because I wanted the tailgate to close with the fob and the console button. If anyone in Atlanta needs it done send me a PM and I'll put you in contact with the guy that did it for me.

Free coding in NYC - XBimmers.com | BMW X6 Forum X5 Forum

This guy can help you with coding (anybody from NYC). He was doing it for free earlier this year but I don't know if it's still free.

I would love contact info for someone that can do some coding in the NYC area. The link above is for OBMF, who is currently taking a break from any new requests.

digital speedo should've been included from the start... :( Much better than staring at MPG. :D

:thumbup:Can you post a link for ebay cable?

So here are a few videos
1. Double blink hazzard lights


2. Hatch open and close from key fob (or button inside)


3. Mirrors fold on lock and unfold on unlock (from fob or CA), and window up and down from the fob


Pic of M HUD

http://www.wardphotography.com/X5/hud.jpg

Sweet!! :thumbup: :thumbup: :thumbup:

I want this sooo badly. The HUD enhancement is awesome as well. Please let me know who will code for a fee

I am sleepy from 23 flying hours yesterday so there are no warranty issues with this enhancement?

Perform this at your own risk. You are modifying parameters from either nicht_activ to activ or vice versa in different modules

Yes, please post ebay link to seller you purchased from, thanks.

This is the cable I purchased
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

This is the coolest enhancement. Can you switch between Non-M HUD and M-HUD? If so, how? Wondering why you didn't list this one in your first post or post #6.

^^ Because I just got it working yesterday, along with coding the hatch open/close. You can switch, its an option on what you what displayed on the hud. Remember I have a CCC (MY '09), not a CIC

Thanks! So there is a chance that it might not work on LCI E70s with CIC? I'll start on that guide when I get home.

keep us posted

^^ Everything I coded will work on the LCI

subscribed...

should work the same for my '10 35d right?

Yes....

This is one place where I'm hating not having a PC in the house. Need a damn Mac version of the software.

I was going to ask the same thing, since dealers are now more and more picky, they are always looking for reasons to deny a claim and just slap "external forces" or "owner modification". I doubt that they can spot if iDrive disclaimer is missing, but they can definitely spot some of the other modifications.

I understand that you are only changing active/non-active parameters, but if they are available and BMW did not add them, I wonder if there is a reason for it. Most of these modifications done by coding are not available as an option, so BMW is definitely not trying to charge us to add those features.

Did anybody ever asked the dealer if the could perform the changes? Removing the warning would be out of the question, but for example closing the rear lid with the fob is something that should have been programmed from day 1

I am not going to say that I guaranteed it, but I am pretty sure most of these functions are available elsewhere in the world. But in USA, possibly due to insurance/safety issues, they disable most of these functions. Like windows up from remote, someone might be sticking their head out or arm, and it is a liability issue. Same with trunk, if you are away from the vehicle, you should not be closing the trunk with the remote. And if you are close enough to see it is clear from obstruction, you might as well push the button on the door to close it.

Don't get me wrong.. This is not me saying these stuff, just an assumption why they did not include the functions (or simply disabled them) nein nein nein..! :p:

With the new user-ability to customise settings, there is nothing the dealer can or will do further. Heck, I asked them to adjust the sensitivity of my mother's E90 automatic headlamps and they couldn't do that either. :confused:

Might consider coding my pop's X5 if I feel generous (it's a lease); already going to ask someone to code the E90. My X3 was coded back in March so I feel kind of cool motoring around with Euro-spec headlights, getting rid of the key chime was a HUGE improvement, and various other improvements. :cool:

Something I hadn't thought of, but some of these very well may void any insurance claim in case of an accident. Imagine totaling the truck and the insurance company telling you you're SOL since your headlights or warning message didn't meet spec.

Hrm...

It passes the Virginia state safety inspection, which only requires two forward headlights (and obviously a functioning high beam). :beerchug: And I even looked up NC safety inspection, which is the same: just two forward headlights. Plus, you'd have to be pretty damn blind to miss the headlights of a massive car even if viewing from the side angles. :rolleyes:

It's silly how FMVSS is so strict yet a Euro-spec car would meet many state requirements. Virginia has nothing in its code on vehicle reflectors or emissions controls (partly because the state has no emissions inspection), although it does say DRLs have to turn off if the blinker is located very close (example: Audi A4).

What exactly are you two referring to? Is it the euro-spec headlights? What is the difference?

I'm not speaking about any one code in particular. What I am saying is, if for some reason you got into an accident, I would definitely not put it past the insurance company to plug their computer into the car, see that defaults are changed, and deny you your claim. "Mr. Smith, we regret to inform you that you're out of luck because your car did not have the proper warning displayed upon startup on the display screen". "What's that have to do with someone hitting me at 25MPH?" "It doesn't matter, it's been changed from factory default. Go buy a Hyundai".

I'd be shocked if the insurance companies had that kind of time to plug computers into every single collision report. :rolleyes:

If every single mod has possible ramifications on insurance, then almost everyone on this board would be guilty of it. Perhaps someone will sue me for removing the airbag warning sticker on the sunvisors.

Still this doesn't answer me what does the euro-spec headlights mod change in operation?

For the E70, basically deleting the amber blinkers as the parking lights does the trick for the headlights, as the corona rings are the parking lights.

For my older X3 (before corona rings were introduced for the LCI in 09/06), there was a small bulb that fit in the upper corner of the high beam, similar to the E46 and many other cars. For North America since the blinker functions as the parking light, the small bulb is deleted. So once I deleted the amber light as the parking light, I had to put in that extra bulb. The blinker still works fully as designed.

http://img.photobucket.com/albums/v3...X3/Pic1007.jpg

Of course, in Europe they don't have the reflector embedded in the corner or the wheelwell (in the case of the E70) but I'm not going to go thru that trouble.

Thanks for posting. I am going to order the cable now.

Thanks for the info AZ.

Has any of you seen the size of that instruction PDF.. It is crazy long. I thought it would simple hack in get out, but there is whole lot you have to do.. I am afraid of bricking my BMW.

Thanks a lot for all the info. I just got my cable, too.

I need to change my radio frequency to show even numbers though. Do you guys have any clue if we can do this with the NCSExpert software and this cable?

Thanks again

Smiler51

Got the cable and the installation seemed to go well. However, I can not find the E70 in the menu. What am I doing wrong? Thanks!

In the menu of what?

You need an FSC code to activate the sirius functionality. Contact [email protected]

It's in the Inpaload start menu . We got F1 to F10 listing all models except the E 70. I just downloaded a newer version today. Hopefully it will help.

Ok this is how far I got. The car is communicating with the Laptop, both black dots are on, and the VIN loads in the NCS expert. Before I proceed, (I am very careful here) a few questions to the experts:

-In the Inpaload menu there a lots of models under F3-F9 but no E70. (as shown in the instruction PDF where the writer chooses the E90) Will this be an issue later on?

-I am working with an E70 2010 Diesel. I did download the v41 daten files but I am not sure if I need to copy and paste them for the 2010. Any ideas?

Thanks in advance.

^^ Don't worry about doing the airbag tests, INPA doesn't have the E70 by default. There is a file called laden.bat, run that to update your daten files. You will still need to copy files manually to 3 subdirectories though.

Has anyone done a step by step instructions for 2012 E70 LCI? The instructions in the PDF is vague when it comes to picking the right file/mode, and I wouldn't want to mess anything while trying to cancel the amber lights.

Anyone in the Tampa area coded theirs yet? I have a 2011; would be willing to pay for it too.

Can you share what parameters need to be tweaked to get this M-HUD?

+1

The parameters are in this thread
http://alturl.com/ipvna

Good thing I didn't see this before I ordered my car, would have made me buy the HUD! Too expensive already ; )

Looks really cool and functional!

Will the m-hud work on a 2007 E70 X5 with existing HUD?

will this cable work for a 2009 4.8?

Yes

M HUD works!!
 

Bad Mofo did it again... he successfully coded my '07 4.8i and I now have the M Hud :thumbup:

Thanks again!!!

What is the difference between the HUD that comes oem if purchased and the M HUD?

If mine did not come with the OEM HUD will this M HUD work?

I tried to code a X5 with build data around Nov 2012; Daten was updated to V44, But there is no module cappl found in that car, this car does come with HUD.

I did found those settings such as MDrive, HUD_M etc in backup file, does it indicate those m_hud settings are now in other module or probably there is new module for m_hud?

That's awesome how easy it is to do these things these days.

I am going to be getting my car coded this week and just had a question about the M-HUD.

The pic shows what gear the vehicle is in in the middle. RPMs in the colored circle, speed in small numbers on the bottom right. Is that the only setting? Is it possible to show the speed in the middle of the circle and gear in the bottom right? I've gotten so used to the HUD, that I never look down to look at speed anymore and it's nice to have the big numbers staring you in the face on your windshield.

Ok, I can tell you have to have HUD to take avantage of the m-hud. Oh well.

There are other things I would love coded on my 2008 X5 4.8.

The foglights come on automatically when the headlights come on.

Question : If you code the mirrors to automatically close when the door is locked with comfort access or the keyfob. Does the mirrors then automatically open when you unlock the doors?

Anyone in or close to Western North Carolina want to help me out with the coding (help me out as in doing it for me). I will pay for the help.

Hi,
Does anyone now if i can use the cable that came with my JBD reset tool to connect to my car's OBDC ? One end it has the OBDC connector but the other end has a serial connector, similar to a monitor cable ... :dunno:

You might have to ask that question on the other forum, I don't have access to a MY '12 to check
Yes, the mirrors open automatically when you unlock the door, if you folded them on lock. It is possible to code the foglights, don't know why you would want to do that though:dunno:
Not sure on this one, it would have to be a custom thing, its not just a simple parameter change

Sounds like with mhud though, you get an option in idrive to turn mhud on and off, so I could have traditional speed on window and then turn on mhud on the occasions that I want it. Right?

Is this calibrated correctly for either the regular gas or diesel engine. Isn't this calibrated for the m engine only and therefore isn't this setting pointless unless you have a real m engine ?

The diesel engine only revs to approx 5000 rpm.

Its not calibrated, but you can calibrate it. I haven't done it.

Has anyone ever had problems with coding? Any features that work before but not work after coding?

I have a late January 2012 build, actually just finished on January 25th and is shipping to the dealer.

I would really like to have the mirrors close on lock, idrive disclaimer removal, trunk raise and lower with key fob.

Now, how can the mhud be calibrated?

Just ordered the cable but a little worried, seems a little hackish.

subscribed...

Any coder in Houston, tx

Wait, so my 2007's HUD isn't just an orange LCD? It's capable of full color???!?!?!!!!

I was able to code m '08 X5, if yours is '09 or older I could take a look (newer models need a different cable).

Yes, thats right, but you should be seeing two colours now, orange and yellow

Subscribed as well - would pay for coding in Chicago area.

Coding
 

Anyone in Central FL area that does coding?

and red :thumbup:
I was also surprised on my '07 but it works!

Anyone in the Dallas area doing coding?

2nd that.. I'll drive up for it.. or houston

oppss.. you got pm

onebadmofo did mine recently... 10min and few bucks later (tip) I had the following:

- auto tailgate close w/keyfob
- welcome light now include fog lights with alarm disarm/unlock and comfort access
- all disclaimers gone (idrive boot up and backup)
- euro blinking hazard lights (double blink, pause, double blink)
- dvd movie in motion
- power folding mirrors on arm/lock w/keyfob (and unfolds when disarm)
- open and close windows/sunroof with keyfob
- rear fog lights work tandem with brake lights (makes a huge difference)
- digital spedometer in dash (lights up in same orange color)

everything works and i'm loving it... this guy was very professional, quick and he's done hundreds of them... he even spent time going over and testing each feature to make sure you were completely satisfied... and for much less than purchasing any equipment and having to learn at your own risk.

if you're anywhere in ny look him up... it's worth the trip.

- dvd movie in motion
- rear fog lights work tandem with brake lights (makes a huge difference)

??? on US model?

anyone that can code near Fort lauderdale or Weston in South Florida ?

@ bluedragon / miamipanther / everyone,

I'm missing CAPPL module. Any ideas why? I already coded other stuff like double blink hazards, low beam on unlock, and a few others but can't do idrive disclaimer from CAPPL since it's missing. Help please...

Model: 2007 X5 3.0 SI with idrive but no navigation
Daten: v41

Please reply or post in the following thread. Thanks.
http://www.xoutpost.com/bmw-sav-foru...ing-cappl.html

yes, us model?

works like a charm... had it done just because it was included with everything else...

wife likes it.. and it doesn't distract me... i'm too focussed having fun with the TT8!! :thumbup:

Its because you don't have the navigation. You might need to look for it in the mask or MCIC

Anyone have any pictures of the rear fog lights? Can u turn them off? Explain more,

thanks!!!

MASK doesn't respond. It give me the following error. I'll look for MCIC.

Error in CABD Look at CABI.ERR and ERROR.LOG.
COAPI-202: No answer from ECU
iIFH-0009: ECU not connected or doesn't anser

What's the version of your daten files?

V41

Anybody coded X5 (E70) 2012 model? Thanks

I really want the backup disclaimer gone. You're talking about the one towards the top of the screen when the camera is active, right?

Any idea what was changed to do that?

I just did mine last week! see here!

Free coding in Madison, Chicago and Milwaukee area - Bimmerfest - BMW Forums

yes, i also had a 2012 X5 50i coded.. everything works..and i'm super happy.

and no, i have no idea what line items were modified to get the startup disclaimer removed...

this guy was quick and knew exactly what he was doing.. said he done hundreds of cars...

why would you want to do it yourself? unless of course you have no one available to do it for you in your area...

i gave him a few bucks and it was much less than the items you would need to purchase in order to do it yourself...

plus, do you really want to risk screwing something up by doing it yourself?:dunno:

anyone in Boston area to code tailgate closing with FOB? Thanks

What's a few bucks? I am gonna give him a buzz when I have time to make it over, but I don't want to look like a dirtbag by giving him too little.

Had mine done this weekend as well from this BMW owner from Madison:

Free coding in Madison, Chicago and Milwaukee area - Bimmerfest - BMW Forums

Everything went well.

Anybody do this in LA?

Coding in Connecticut
 

Anyone do coding in the Danbury Connecticut area?

Hi all, just purchaed an 09 xDrive 48i this weekend. I love the car. I would love to do some custom programming. Can someone point me in the right direction and a how to guide. Thanks!

Its all on the first page of this thread

Thanks. Is this a DIY project? If so, can someone point me in the right direction. If not, anyone in California willing to help out?

Hey Blue_Dragon, that link you post from ebay for the cable you bought, does it work on 2012 E70? It should be the same, but the seller only says up to 2008 E70 on the description.
Thanks.

Cable
 

This cable worked great on a 2011 and 2012 X5.

I used needle nose pliers to remove pin 8, but the seller now says they will ship with pin 8 removed unless you need it and an adaptor.

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

Yes, the cable will work. I've used it on my '09 -'11 so far

Just catching up to this coding stuff today. Also interested if anyone in NorCal has done this and would like to share their experience.

Ii've successfully coded my E70 X5 and E90 over the weekend, happy to help anyone around Sydney if they require any coding service.

I'm planning to do this when I take delivery in a few weeks

Anyone in the Charlotte or Atlanta area able to help me out with Some coding? I'll be driving through atl next Friday enroute to Charlotte on my maiden voyage in our new to us 2009 X5D!

Thanks in advance!

Jeff

Contact Nivedh at nivedhm at gmail dot com. He has coded many BMWs in and around Atlanta including my X5.

Thank you for the reference. I emailed him this morning.

Can I use this for E90 2006 and E70 2011?

Diagnostic USB Interface Cable for BMW - Translucent White - Free Shipping - DealExtreme

coding in Maryland
 

Is anyone coding in Maryland?

I have an idea I would like coded, everyone will want it if it can be done. I live in a hot climate with a black 40d. My wife would put our three kids in the car with the ac on while she loads the shopping. I don't want a car jacking with my kids in the car! Do you know if you can code that the brake/gear change interlock can be prevented if the "where's your key, not in the vehicle" warning comes up? Cheers

coding only enables features designed for other markets, its not possible to build your own custom code and add features that never existed.

If anyone knows of anyone capable of doing this in Las Vegas, please let me know ASAP! I am headed on a Road trip Tuesday 6/19/12. And you know I would love to have all of these features to enjoy my new X5!!! ;-)

If anyone codes in nc lmk inbox me

Get info. Thanks!

Anyone coding near Montreal, Qc ?
Locally, I had a bet for 150$, which I find a little exagerated.

I'm having problems reading only a couple ECU modules so i'm thinking something is out of date or missing....


I can't read FRM or RFK or HKL, KOMBI JBBL I have v41 and an 08 x5. says something about edibas or files missing...


where the hell can i find everything up to date for download... I've been looking everywhere and can't for the life of me find anything up to date. I wanna start fresh cause I have a couple options left I'd like to code but no luck accessing those modules while CAS CAPPL AGB worked.

You are definitely out of date. You can torrent some of the daten files but they are large. MAKE SURE YOU GET THE FULL VERSIONS! It saves you a lot of hassle. And if my memory serves me correctly, you have to update one version at a time. ie. v41 -> v42 ->v43... You can't go directly from v41 -> v47 or else things get lost in translation. (at least that was what i was taught anyway). Hopefully someone chimes in soon.

It was a real pain in the neck for me to update to the current version. It got to a point where 80% of the modules can be coded, and then the rest, you were required to find missing files and replace them with the newer version.

hello. i just had some remote coding done. i had the m-hud enabled and now i can only program one of my steering wheel buttons. my whole settings menu is different. i have a mdrive option, etc. can anyone tell me if its possible to just add the mhud without messing up the other settings and losing the diamond button functionality?

No, it's not possible.

MHUD = 1 programmable button
non-MHUD = 2 programmable buttons

That's why I went back to non-MHUD. You can't have navi info on with MHUD either, which is another drawback.

Note: You can uncheck MHUD in the options, which reverts back to the non-MHUD style. However, since the option is still coded in, you still only retain 1 programmable button. The only way to get back to 2 programmable buttons is to re-code and remove the options that provide MHUD.

^^ I told him I reverted, M-HUD is kind of useless

thanks for the responses fellas. i thought it looked pretty cool and would be a cool feature, but.... i could hardlly sleep last night wondering what else has been inactivated from my coding session. im waiting for the guy to get back to me to change it back. i downloaded bmw standard tools and started following the steps to do it myself, but chickened out. that bmw coding forum has diy directions all scattered around. i need a step by step to just change it back.

I've coded a lot of different options into mine. The MHUD deal is the most invasive one. Nothing else drastically changes iDrive options like that one does. Rest easy.

FYI. I messed around with upgrades for a while then eventually just deleted everything. Just installed v47 and it worked great.

Hello BlueDragon and all!
Being new to these forums as a first time BMW owner I've read this entire thread with great interest. Bought my wife a '12 X5 50i in July and was so jealous of her ride every time I got to drive it I got a '13 X5 50i for my self a few weeks ago. As far as I can tell all this coding should be compatible with her '12, but does any one of you know if my '13 can be done as well?
Also, is there anyone out there in the greater Los Angeles area that is experienced in doing this and interested in making a few shekels in the process?
Cheers!

Coding done:

- LCI tail light retrofit
- 'DVD in Motion' enabled (on a CCC)
- Side-markers disabled
- Double-blink Euro hazards
- Open/close windows/sunroof with key fob
- Power fold mirrors with key fob
- Key fob eject with engine off
- Unlock doors when key fob ejected
- Seat belt chime disabled for driver
- Remove iDrive warning when starting car
- Wipers complete full cycle when ignition is off
- Digital speedo
- Low beams on when unlocking
- Increase Angel Eyes brightness
- 'Key in ignition' door gong disabled
- Auto Tailgate open/close with key fob and button inside
- Opening doors interrupts window roll up disabled
- Enable fog lamps with high beams
- Enable fog lamps with high beams flash
- Registered new battery (coding was not needed)

Special thanks for info posted by blue dragon, revtor and Triple_O on various forums.

Do you have a link to the daten files ?

Also how do you do DVD in motion on CCC? I didn't think that was possible!

No, I don't. I searched for and used the latest daten E70 files that I could find. Search for "E70_V41_Daten_Files.rar".

DVD in Motion, according to quite a number of people (including some pro's), is not possible on CCC. I have a DVD Changer so maybe that's the difference? Here's a video of it. :)



Probably worth noting that I will probably never use this feature, for safety reasons, but I wanted to see if I could get it done ;)

I have the DVD changer too wow I need to find these programs and try this.

Yep, the CCC DVD Drive does not play DVD movies, just DVD maps, but the DVD Changer does.

Hey, nice to see you on this forum :thumbup:

Any idea about the two additional items that I'm trying to take care of? ^^^

The language and the foglights on all the time?

The language and the foglights on with high beams.

Try using what I told you the other day as far as the languages go. If it doesn't work, you can always change it back. I can't tell you for sure but it should work. I should be in NJ next week if you want to come out and we can test it out.

As far as foglights with highbeams, check your FRM for a line starting with:

FL_UND........

and flash to pass

LH_UND........

set both to nicht_aktiv.

Is there a way to code the car so that if i open the driver's door to peek out while in reverse the car does not go into park?
Thanks

I've only been able to do this on 2012+ Fxx vehicles. I haven't tried it on any Exx vehicles 2012+ yet. Tried it on a 2011 X5 and it didn't work.

:(

Hi guys,
Perhaps someone can help me here..I have done the following coding
- Side-markers disabled
- Open/close windows/sunroof with key fob
- Power fold mirrors with key fob
- Remove iDrive warning when starting car
- Wipers complete full cycle when ignition is off
- Digital speedo
- Instrument panel lights always on
- Fogs on when headlights come on
- Auto Tailgate open/close with key fob and button inside
- Enabled brake force lights when braking

The trouble I'm having is that my LED angel lights don't stay bright (it dims) when the headlights come on. I have set the correct parameters but doesn't work. I hear someone esle got the same problems when using xenon or LED bulbs in the fogs ?? does anyone know .. :dunno:

On my 2011 35D, I have to go to settings and select lighting, then turn daytime lights on. That keeps my LED angel eyes bright.

Anyone know the code for

rain sensing sunroof close and complete full wiper cycle on shutoff?

Also is there any pre lci coding that actually makes angel eyes brighter? I've heard the coding does nothing with lux v3's

1. rain sensing sunroof close. not recommended
2. complete wiper cycle: JBBF. ZYCLUS_VOLLEND_KLR_AUS.....nicht_aktiv > aktiv
3. angel eyes brighter: FRM. PWM_RL_BL_1_FKT_SL.....wert_05 > wert_01

Thanks

The coding for the sunroof close is kinda useless for rain sensing since it doesn't seem to roll windows up. That total package of rolling windows up and Sunroof closing would be pretty cool.

yea I just realized it doesn't work when the car is off so thats pointless :rofl:

That's why I said "not recommended". Was too lazy to right an explanation. Thought I would just give the useful info...

thanks! :thumbup:

do you happen to know the module/code to turn off the gong sound while key is in?

Seat Belt Chime for Driver disable

ABG module.

Function: SBR_FAHRER_1
aktiv -> nicht_aktiv

Function: CC_GURTWARNUNG_1
aktiv -> nicht_aktiv

:thanks::yourock:

Just found a fellow BMW CCA Member in the DC Metro Area that did some feature coding on my 2007 E70 X5: http://youtu.be/ZnaUBYCGHRk

Has anyone in the Tampa area successfully coded theirs?

anyone in Vancouver, Canada or around that area that does coding??

There is a guy of craigslist that does it in vancouver. If you have all the equipment, i can dig up all my notes of when i did it and help you out. been a while though.

i received a pm for some help so i may go this route

i also do not have the cable or software, if it ends up being easier i may just try myself with one of the E70 coding threads i seen

Coding E70
 

There's a member here on this forum - TRIPL_O - who did both mine and my wife's X5s remotely just a week ago. Exceptionally professional, simple and smooth process over the phone and internet. Even sent me a loaner cable. Though I decided to purchase one my self so I would always have it handy if some new coding was needed.
I'm am relatively geeky my self, but my time is far too valuable than to start learning the coding from scratch and in the process possibly jeopardize our brand new 2012 and 2013 X5s.
The cost is far more than reasonable and in hindsight I wouldn't have done it any other way.
If you've got any questions just hit me up and I'll try to answer.
Cheers!
H

that's funny, that's who actually pm'd me
glad to see the process was painless
i've seen my E46 coded before and looked simple enough but your definitely right in regards to not wanting to mess anything up so i'll probably do exactly what you did and have TRIPL_O code mine remotely to then i'll purchase a cable incase i want to add anything else

it was a bit intimidating at first but you get the hang of it. and plus, if you make a back up of your stock settings, it's a simple copy and paste =)

TRIPL_O did my coding. I can recommend his work.

Then I purchased LCI tail lights and I wanted more coding done.

So I purchased the cable and got myself trained on using it and the software. I'm very experienced with computers but less so with cars. The learning curve was steeper than expected but I can do it all now.

I tried virtual machines under Windows 8 and under Windows 7. Didn't work under Windows 8 and way too much trouble under Windows 7. With a lot of effort, managed to add Win XP to my Win 8 laptop. Then all good. Make sure to use Win XP to keep things simple...

Oh, and my E70 X5 is in the dealer shop right now; they are trying to resolve a DSC fault error and have even connected to BMW NA now for diagnostics. I know they've done software update so all my changes are probably gone. I'll be ready to redo them when I get my car back...

Windows XP 32bit only if my memory serves me correctly

That's the only one that works with all necessary software. Some will run on 64-bit.

TRIPL_O
 

TRIPL_O - please reach out to me. Interested in a remote coding job from you.

still waiting on TRIPL_O to email back but i pulled the trigger on purchasing the cable

NEW BMW INPA / Ediabas K+DCAN USB Interface D-CAN CAN OBD OBD2 OBD016 | eBay

going to try using BMW Coding Tool app with the software too, seems easier to learn
would be cool if i could pick this up and help others

I'm gonna try and do some of this coding myself too. Still waiting for the cable to arrive. ordered mine from ebay as well.

I already downloaded the NCSExpert software and BMW Coding Tool app.

I think I still need the E70 daten files...

Anyone have the files and willing to share?? help a fellow member out! :thumbup:

I've got daten files I could send to you, haven't tested to see if they work as I haven't received my cable yet
I'm looking for ncs expert still if u could send it somehow
I've got the BMW coding tool too, can't wait to try it out

here's where I got the software:

Bmw INPA Ediabas, NCS Expert tool, WinKFP - BMW forum. Diagnostics, coding, programming, repair BMW vehicles.

scroll down to the software section and there's a link so some eastern europe site. I downloaded it there. It's about 650MB.

Thanks for the offer on the daten files, but another member here already sent me the files.

I'll try this whole coding deal once i get the cable. i'll keep you posted. :thumbup:

Search for a torrent called "BMW Coding Tool Pack"
It's well packaged with the software and DIY guides. In the comments they also include a link to and another torrent with the latest Daten v47.1

that site makes you sign up, it's all in Russian too so i don't really wanna figure out how to sign up either haha

*EDIT*

n\m clicked the wrong link, found it.. thanks :thumbup:

daten v47.1 says its for E89?

The Coding pack only includes v47.1 for E89. There is another torrent with just daten files and has folders for multiple chassis including E70

ok I downloaded both BMW Coding Tool Pack and the latest Daten v47.1 and loaded all the software on my laptop. except for having to download and register a couple of .ocx windows files, everything went smoothly.

Now, I'm just waiting for the cable to get here and I can try coding.

Thanks for this tip! This package definitely looks like it's gonna work, well packaged and everything explained.

Ok, I didn't install the software from that Russian site, I ended up following digdesign's tip and got the BMW Coding Tool Pack and the latest Daten v47.1 from torrents. This seems to have everything we need.

Haha i grabbed them all to be safe
Don't want to be hunting them down later

X5 / E70 Successfully Coded - Melbourne Australia
 

I have successfully coded my 10/2012 Manufacture MY13 X5!! :D

The bits I have coded are
1. The iDrive Disclaimer
2. DVD in motion (CIC)
3. Wiper to complete swiping when vehicle is switched off
4. Closing the Tailgate with the internal button (Opening and closing tailgate was available with key fob when I bought the car)
5. Folding Mirrors on pressing button on key fob. (Opening and closing windows and sunroof available with key fob when I bought the car)

I wanted to set the Fog Lights to "on" when Headlights were switched on, but I found that this was already activated.

I have had my car for just under 2 weeks....

I would like to thank Mark From Tampa who patiently explained and helped me get started. I would also like to thank Chris from BM Technic in the UK, whose Cable, Software and assistance was all it took....I do not have any vested interest in BM Technic, but Chris' cables and software is ALL YOU NEED!!!

just out of curiosity if i were to code an option that i may not have like opening/closing the tailgate from key fob.
what would happen? i'm assuming nothing but just want to be safe.

You will have the Tailgate open and close from key fob!! That is all!! :D

mines only an '07 so i don't believe it has that function, i was told only '09+ have it?

I just traded in my '07 X5 and I didnt have the auto open tailgate feature. I am guessing, that the motor to open and close is not present...therefore, "coding" is irrelevant....there are several more knowledgeable people on here than me....perhaps they might chip in too? :D

So this thread had me looking into doing some coding. Here is the list of things I have found that I want to do so far.

Double Blink Hazards
Remote trunk close
Disable iDrive Disclaimer
Remove IDrive warning when starting the car
Complete wiper cycle
Angel eyes brighter
Seat Belt Chime for Driver disable

Couple of other things I was wondering about though.

Can the passenger side seat-belt warning be disabled? (Annoying when laptop bag sets it off :angryfire)

Can you have fog-lights always on when low-beams are on? (auto or switch, again annoying having to turn on separately)

Can you disable the directional fog-light turn indicator? (Dumbest thing ever, looks like one is burned out whenever you turn :confused:)

I'm thinking if you set them to stay on they might not act as turn indicators
It's funny you bring that up cuz when i first got the x5 I thought the bulb was burnt out or wiring was faulty

-Passenger side seat belt warning can be disabled
-Fog-Lights can be coded to come on automatically when the lights are turned on
-Directional fogs can be disabled

FINALLY SUCCESS!! HAHAHA

It took many hours of reading, and googling to setup the software correctly in Windows so the cable can communicate with the car. It was not easy, but it's worth it.

I was able to code the Digital speed and auto-fold mirrors on lock. The two features I wanted the most.

Thanks to everyone that helped, especially blue_dragon and digdigital!!

:thumbup:

Good job!

Auto tailgate was an option for '08. I got it.

Will coding cause any issue with a vehicle under the CPO program. If not, anyone in the Sacramento area willing to code for me?

my cable finally showed up
the disc is a burnt copy, not to impressed with that as the eBay picture showed otherwise, oh well
getting ready to copy all the files over to my VMWare WinXP then i'll pop in the CD to see what it has on it

http://img17.imageshack.us/img17/5664/img2060dl.jpg

quick question...
just popped in the CD that came with the cable to see what was on it.
it has an awesome pdf write up for INPA - EDIBAS FULL-English Edition.

should i install that or go with thepiratebay BMW Standard Tools 2.12 install

don't want to install both incase of C:\ folder file conflictions

what do yall think?

*EDIT*
went ahead with the BMW Standard Tools 2.12 install
so far i believe i've got it all installed and missing files or necessary files replaced
using BMW Coding Tool, i updated Daten Files successfully, loaded TRC file successfully (haven't plugged into the vehicle yet tho) and ran into a problem updating WinKFP says i have no DATA folder in my SP Daten folder which i don't, checked 3 different Daten file zips i downloaded and they have no DATA folder either???
my Daten folder shows... cfgdat, daten, ecu, format, kmndat and sgdat
is there suppose to be a DATA folder?

looks like the exact same cable I got. You should install from the included CD first. I tried just installing thepiratebay BMW Standard Tools 2.12 first and it didn't work. it seems like it was just an update. The full version is on the CD afterwards, update it with thepiratebay BMW Standard Tools 2.12.

Also, when you get to 4) Run step 2\INSTALL\instprog.exe

Make sure you copy the entire 02_Step_2 folder to the C: drive, it will not run directly from the CD... It will give you errors. I only found out after some searching on Google.

Do the same for 03_Step_3 folder.

I just did all this last week, so it's still fresh in my memory.

edited my post since you replied if it helps with more info..
i've got someone on bmwcoding site sending me another Daten folder so i'll see if it has a DATA folder, if not i'll try your suggestion
thanks

Actually, I didn't even use WinKFP, it was installed and on my desktop, but didn't need it for coding.

I just used INPA to verify communication with the car, then open NCSExpert to do the coding.

i was using the BMW Coding Tool since it's all one click button options for the updates
you think once i get to plugging the cable in it might still actually work without updating the WinKFP then?

i also used the BMW Coding Tool to update the daten files. it was quick and easy.

yea, I don't think you need to update WinKFP... just follow my instructions in the earlier post about running the CD install first. Just follow the included PDF, but copy the step_2 and step_3 folder to the root of C: drive then finish the installation.

so uninstall the piratebay copy
install CD as stated above then should i try installing piratebay copy after that to update the files?

if i wanna use the BMW Coding Tool for coding do i just run NCSExpert in the background?

one last thing
BMW Coding Tool shows Chasis, obviously E70 then shows Module and has a huge list of options.. what do i choose there?

thanks for all the help
i got a proper Daten file finally with the DATA folder and i'm pretty sure i've got the NCS_DIY.pdf file already.
it's late now so i'll try testing this all out tomorrow after i drop off my E46 for VCG and VANOS replacement
X5 goes in wedsnesday to the dealer to get glovebox half replaced and i'm going to check and make sure my software on the X is all up to date too which means ill just do a test coding
thanks again

ok good luck!

I miss my old E46... hope the next owner is taking car of her.

got software all installed, everything updated successfully as mentioned
jumped over to the NCS DIY and followed it to a T
i'm plugged in, key fob is in the slot, following building the profile
get to pressing F1 than select CAS, than F3 for ZCS/FS f. ECU and get an error

VIN is faulty coapi-2000: EDIABAS or SGBD error IFH-0003: DATATRANSMISSION TO INTERFACE DISTURBED

searching google about it now

i did notice when i plugged the cable into the computer i had to manually find the USB drivers for it so i selected the driver from the disc in the USB Drivers folder, ftdiport and it installs as a USB Serial Port (COM3), there is one other driver, ftdibus that i didn't try fully installing.

any suggestions while i'm google searching?

haha i thought i was so close too

*EDIT*
got error IFH-0003: DATATRANSMISSION TO INTERFACE DISTURBED cleared
i had the car sitting to long with the key fob in, turned on the vehicle and my cable LED came back on but now i got another error
VIN is faulty coapi-2001: EDIABAS not initiated even tho i see the EDIABAS Server sitting in the toolbar at the bottom

Did you change it to COM 1 and the latency timer setting to 1??