Xoutpost.com - X5 diesel mod - unleash its true potential......

Would you do this?

BMW M57N2 x30d Complete DPF removal kit including software upgrade and diagnostic programmer))))

The Diesel Particulate Filter (DPF) on the below BMW models is renowned for blocking and requiring replacement at a cost in the region of £1200. When faulty the DPF causes substantial loss of power and impacts fuel economy dramatically. This listing provides a fix and forget solution!!!

Coverage
3 Series
5 Series
X5 X6 E90, E91, E92 E60, E61 E70 E71 325d (M57N2), 330d (M57N2), 330xd (M57N2)
525d (M57N2), 530d (M57N2), 530xd (M57N2) X5 3.0d (M57N2) X6 30dX (M57N2) February 2004 to Current
February 2005 to Current February 2006 to Current September 2007 to Current

Direct replacement on part numbers - 18307795998, 18307806411, 18304717412, 18307798330

iFlash diagnostic programmer supports models up to early 2009. For later models, please contact us for our alternative solution.

Anyone throughout the UK and Europe can now purchase our DPF removal kit for this vehicle and release the true potential of this incredible engine.

Performance and economy software available up to 290bhp!!! Please enquire for details...

What's in the package?

2.5" Bore downpipe with machined stainless steel turbo fitting, uprated stainless flexi section, milled fittings for lambda and temperature sensors.
Two DPF OFF software upgrades with choice of performance programs. (Redeemed on site or via e-mail)
iFlash OBD2 diagnostic programming tool with cables and PC software.

This kit is a direct bolt-on replacement for the Diesel Particulate Filter and downpipe that are fitted to the car from the factory. In order to disable the function of the DPF our software upgrade is essential. If you are unsure or require assistance, please don't hesitate to contact us, we will be delighted to assist.
Built for performance, economy and longevity!
Performance - You will enjoy reduced turbo lag and a noticeable performance difference throughout the entire rev range, the original downpipe exits the turbo with an immediate restriction. The DPF is designed to collect the particulate matter (soot) in the exhaust and then at extreme temperatures, burn the deposits off into ash. This poses a restriction in the exhaust system and by design induces excessive temperatures which have a direct effect on your turbocharger and intake temperatures. Removal of this filter will result in an excellent improvement in fuel economy and when coupled with the performance software, the new behaviour of the vehicle is remarkable. Turbo life will be extended and turbo lag will be substantially reduced.
Economy - You will experience a 5-10 mpg improvement over the original DPF depending on your driving style and software selection.
Longevity - Your upgraded downpipe is over-engineered in 316 Marine Grade Stainless Steel and the flexible coupling in 304 Grade Stainless Steel, flanges are laser cut for a perfect fit and finish, your new downpipe should outlast the life of your vehicle. You should also expect extended turbo life as a result of reduced turbo temperatures.
How does it fit? - This downpipe was carefully developed using the Genuine BMW factory item as a template and tested on the vehicle; improvements were made to flow where possible. Every downpipe is hand made using a jig ensuring a perfect fit every time.