X5 DEPO Angel eyes?

[Ambrosius]

Does anyone have any PDF instructions on how to install the x5 DEPO Angel eyes? Particularly the wiring. In the picture below I am assuming the left two plugs are for the high beam and the angel eyes. The I am pretty sure that that all I have to do is unplug my high beam and connect it to this one, but where do I plug the angel eyes on the DEPO to the car?

Rico.

[most def]

All the connection will fit the factory connections you cannot make any mistake if you look at what you are doing.
All the plugs are there on the vehicle, i just changed mine and have no issues

[simoncpw]

The Angel Eyes should be plugged to the "Park Light" (the little light about the high beam on the original headlights).

[Ambrosius]

Originally Posted by simoncpw

The Angel Eyes should be plugged to the "Park Light" (the little light about the high beam on the original headlights).

OK I guess I will need to fish around for the "park Light" I only see a connector for the turn signal, high beam and low beam, nothing else.

Then again it could just be me since my car only came with halogen lights and I am trying to convert to HID.

Rico.

[simoncpw]

the park light should be just above the high beam on the original headlights.

[simoncpw]

Here... this is where it should be. Hope this helps