Any diy valvetronic intermediate lever post?

		Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Any diy valvetronic intermediate lever post?

Xoutpost server transfer and maintenance is occurring....

Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management

LinkBack

Thread Tools

Display Modes

#28

03-30-2015, 07:11 PM

Slow&Steady Slow&Steady is offline

Member

Join Date: Feb 2015

Location: Mooresville, IN

Posts: 35

OK I'm out here working on this thing and I checked under the oil cap while its running and it has strong vacuum pulling on the cap. I didnt take it off all the way. I just lifted it till the engine stumbled then put it back down.. I pulled off the CCC caps and the diaphragms are new and clean. So I checked everything good and put them back. Started it again and its the same. Should I have that much vacuum at idle on the 4.4? Or is there something else I should check.
Just trying to single everything out one thing at a time.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 07:09 PM.

© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.