Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #11  
Old 06-14-2015, 07:22 AM
Member
 
Join Date: Jun 2015
Location: Southlake, Texas
Posts: 2,094
X53Jay4.8is is on a distinguished road
Depending on the age and miles of the compressor unit I would replace the whole unit as opposed to just a clutch change.
Reply With Quote

Sponsored Links

  #12  
Old 06-17-2015, 09:43 AM
Member
 
Join Date: Apr 2015
Location: Cedar Park, TX
Posts: 139
bcolins is on a distinguished road
Quote:
Originally Posted by axgordon View Post
As promised! This procedure worked great on my car, as well on one of my coworkers car. Both were 2003 with same type compressors. Please note that compressor shown in the pictures - also from 2003 3.0 which was replaced by the local shop for the same reason. I was to late to advise owner on this repair.

Steps:
1. Remove radiator fan and shroud
2. Remove splash pan
3. Remove AC belt
4. Unscrew torx bolt on the front of the compressor clutch and remove clutch plate. It comes out easily. Be careful not lo lose thin spacer washer / washers. Some may stay in the clutch plate and some may stick to the end of the shaft.
5.Remove snap ring that hold the clutch hub / bearing and pry it off. Worked off carefully using two large flat screwdrivers or small pry bars. Needs little extra effort here, but it will come out.
6.Pry off thermal fuse cover on the clutch coil. It will break in pieces. No worries here.
7. With exacto knife, scrape insulation from coil wires right next to the crimp connectors and solder piece of wire between them. Ignore / break / remove thermal fuse. You can safely leave without it.
8. Verify that circuit is restored using multimeter, or run DIS diagnostic.
9. Seal area with silicone sealer to prevent corrosion.
10. Re assemble compressor clutch.
11. Re-install belt, fan and splash pan
12. Enjoy working AC.
So, you didn't replace anything? You just bridged the thermal fuse?
Reply With Quote
  #13  
Old 06-17-2015, 07:38 PM
axgordon's Avatar
Member
 
Join Date: Feb 2010
Location: USA Maryland
Posts: 95
axgordon is on a distinguished road
Yes! Just bridged thermal fuse. Please use common sense and asses condition of the clutch and compressor for any other potential problems such us clutch bearing for excessive wear and coil for sings of burning. Did compressor made any noises prior to failing. Also, you may use ohmmeter to confirm issue with blown thermal fuse. Let me know if you have any other questions.
__________________

2012 X5 x35i My new toy
2005 X5 4.4 Her's (Retrofitted Servotronic Steering Rack)
2003 X5 3.0 Mine (Retrofitted Servotronic Steering Rack and Heated Steering Wheel)
2001 M5 Son's car
2000 540i 6sp Sports pkg, supercharged. Son's car (Sold)
2001 530i (Sold)
1999 528i (Sold)
1975 2002 (Sold)
Reply With Quote
  #14  
Old 06-17-2015, 09:27 PM
Member
 
Join Date: May 2014
Location: Hobart, Australia
Posts: 480
ants_oz is on a distinguished road
Instead of just bridging the terminals, why not solder in a new thermal fuse if that is the problem? Once the rating is determined, they are only a couple of dollars at any decent electronics store...
__________________
Cheers,

Anthony
Reply With Quote
  #15  
Old 06-17-2015, 09:53 PM
Member
 
Join Date: Nov 2013
Location: Maryland
Posts: 1,165
David.X5 is on a distinguished road
If someone can post better pictures of the part number on the thermal fuse, I will try to track a source down.
__________________
David.X5
2001 X5 4.4i Sport
SOLD! at 160k miles
Reply With Quote
  #16  
Old 06-18-2015, 11:16 AM
axgordon's Avatar
Member
 
Join Date: Feb 2010
Location: USA Maryland
Posts: 95
axgordon is on a distinguished road
@Trader4 – who needs thermal fuse behind compressor clutch? Just kidding
Now with all seriousness:
With over 35 years, experience working with cars and electrical / electronic equipment I (I am not forcing my opinion on everyone here) felt that bypassing thermal fuse in this particular situation is acceptable risk. Here are my points:
1. I did not see thermal fuses in the AC clutches until 21st century (Possibly it just me).
2. I did not research this, but my best guess for why it is there – avoiding clutch seizure after prolonged slippage. In this case scenario, AC belt will disintegrate and potentially damage other components. Giving this potential unpleasant scenario – thermal fuse seems like a cheap insurance policy.
3. In reality, AC clutch may slip as of result of excessive wear, excessive system pressure due to improperly charged system or overheat due to inadequate ventilation (bad Auxiliary fan, etc.) and clutch bearing or compressor seizure which is rarely happens without warning sounds
4. As most of us on this forum, I pay close attention and promptly investigate any abnormal sounds and perform maintenance as required.
5. My AC system performed top notch prior to failure and after careful inspection I believe clutch circuit became open not due to the excessive heat, but internal fuse failure due to age and exposure to the environment it located.
6. The fuse used here is about half the size of common thermal fuses available at local components store (see picture). Due to limited space and difficulty to solder new fuse in the same location, I decided to cut corner and just bypass it
7. My original intent was to find new or used replacement coil, but two years later I have little motivation to touch it again

Now for those whose clutch failed and who must fix it right:
Pics below – compressor type, original fuse and size comparison between original and commonly used in US applications thermal fuses.

eBay link for the one that I believe will work here. Please do your own research before buying. Be very careful if you decide to solder it in – melted solder applied to the leads will be hot enough to blow new fuse.
http://www.ebay.com/itm/5-Pcs-ELCUT-UMI-Microtemp-Thermal-Fuse-Axial-Type-127-TF-Cutoff-187-2A-250V-/181635002957?
pt=LH_DefaultDomain_0&hash=item2a4a4a324d
Attached Images
   
__________________

2012 X5 x35i My new toy
2005 X5 4.4 Her's (Retrofitted Servotronic Steering Rack)
2003 X5 3.0 Mine (Retrofitted Servotronic Steering Rack and Heated Steering Wheel)
2001 M5 Son's car
2000 540i 6sp Sports pkg, supercharged. Son's car (Sold)
2001 530i (Sold)
1999 528i (Sold)
1975 2002 (Sold)
Reply With Quote
  #17  
Old 06-19-2015, 02:50 PM
Member
 
Join Date: Apr 2015
Location: Cedar Park, TX
Posts: 139
bcolins is on a distinguished road
I did a few more tests a few days ago. My BMW DIS indicated that I had a clutch (magnetic coupling) problem, or.,...that it was Inactive. I cut the wire (actually was already cut,...with a crimped connector,...so I just undid the crimped connector) and put 12 volts directly to the clutch,....nothing happened. I checked the clutch wire to ground resistance with my ohmmeter and got no reading.

Lastly, I tried turning the center portion of the compressor clutch assembly, and was not able to turn it. Thinking this could mean that the compressor came apart and is seized,...which perhaps in turn blew the thermal fuse,.....there was some clattering from the area of the compressor for a few seconds while it was idling in front of my garage,.....I shut it off fairly quickly to do a visual,...saw nothing,....restarted,.....no noise now,....also no A/C When I ran a quick errand.

BTW, I duplicated all the above proceedures on my Land Rover. Disconnected the compressor from its power lead,....provided 12 volts directly to the compressor and it clicked on nicely,...also was able to turn the center portion of the compressor/clutch with little effort.
Reply With Quote
  #18  
Old 06-19-2015, 03:27 PM
axgordon's Avatar
Member
 
Join Date: Feb 2010
Location: USA Maryland
Posts: 95
axgordon is on a distinguished road
Sorry. Sounds like you need new compressor. What year is your X? Engine size? Please update your signature with details.
__________________

2012 X5 x35i My new toy
2005 X5 4.4 Her's (Retrofitted Servotronic Steering Rack)
2003 X5 3.0 Mine (Retrofitted Servotronic Steering Rack and Heated Steering Wheel)
2001 M5 Son's car
2000 540i 6sp Sports pkg, supercharged. Son's car (Sold)
2001 530i (Sold)
1999 528i (Sold)
1975 2002 (Sold)
Reply With Quote
  #19  
Old 08-30-2015, 09:39 AM
Member
 
Join Date: Aug 2015
Location: Toulouse, France
Posts: 24
caseyjay is on a distinguished road
I've just replaced my coil pack and fired up initially, all appears working but after a 20 min test drive, fuse #48 blows. I thought clutch was incorrectly gapped (too close), so put in a shim to give a 0.4mm gap but fuse has gone again.

I note my replacement didn't have this thermal fuse, is it a requirement? would it blow the circuit? thx

it appears I had frayed wiring from coil which was grounding on compressor causing the short...

Last edited by caseyjay; 08-30-2015 at 12:33 PM. Reason: Problem solved
Reply With Quote
  #20  
Old 08-30-2015, 11:23 AM
upallnight's Avatar
Member
 
Join Date: Aug 2012
Location: Cook County
Posts: 7,280
upallnight is on a distinguished road
Quote:
Originally Posted by axgordon View Post
Sorry. Sounds like you need new compressor. What year is your X? Engine size? Please update your signature with details.
If the compressor seized, you will need to flush out the entire system to remove any debris in the system. You will need to replace the receiver/dryer. Not doing this will only cause the ac system to suffer another failure.
__________________
2006 Infiniti G35
2001 BMW 3.0I E53 X5 Build date 08/2000 SOLD
Lotus Europa 1970 Destroyed by fire
Lotus Europa 1970 S2 Renault Powered
Lotus Type 52 1970 Twincam Webers Powered
PORSCHE 911 Targa 1982 The Garage Queen
Audi Avant donated to Kars for Kids
BMW 525IT Sold
Audi 4000CS Quattro Sold
Jensen Healey Lotus Powered Sold
Opel 1900 Sold
Triumph Spitfire 1971 Sold
Triumph Spitfire 1968 Sold
Plymouth "Cuda" 340 Six pack SOLD
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 02:48 PM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.