Check Brake Lining

[squeasel]

QSilver7: Much thanks for the reset procedure. That did the trick.

[Qsilver7]

Originally Posted by squeasel

QSilver7: Much thanks for the reset procedure. That did the trick.

Great! Glad it was something simple.

[tintrx]

I'm trying to replace my wear sensor, but its brittle and falling apart when I try to separate the sensor boot. any help will be appreciated. thanks

[jdstrickland]

Originally Posted by tintrx

I'm trying to replace my wear sensor, but its brittle and falling apart when I try to separate the sensor boot. any help will be appreciated. thanks

If the small block crumbles, then it is toast. You need to replace it.

[tintrx]

It's crumbling at the harness

[g300d]

The sensor has its own long wire that plugs into a connector in a junction box by the shock/strut. Is the crumbling wire part of the sensor or part of the vehicle harness?

[tintrx]

It's at the harness part, near the strut tower.

[g300d]

Ah. Never heard of that before. I'm not sure where the next stop of that harness is.

Maybe try realoem?

[jdstrickland]

Originally Posted by g300d

Ah. Never heard of that before. I'm not sure where the next stop of that harness is.

Maybe try realoem?

+1 on that, I've not heard of the connector falling apart.

Looks like you're in McGyver territory.

[tintrx]

Lol. As the old saying goes..... You can just about fix anything with duct tape and a hammer.