|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#6
10-12-2015, 06:04 AM
|
|||
|
|||
|
This is not likely an O2 sensor issue, trust me.
If you are only using Torque Free, move on from Torque Free and spend the $3.99 and buy OBDFusion, it is far better than Torque Pro as far as I am concerned. I need to see Freeze Frame data Logged data will tell me WAY more than you can convey. This problem is likely a Lean problem which will be clearly shown with the data. Lean conditions are more often than not due to vacuum and/or crankcase air leaks. Occasionally a soft failing fuel pump could be an issue as well. For vacuum or crankcase air leaks, smoke testing is the easiest way to figure out if and where a leak is. Here some examples of ways to smoke test: https://www.youtube.com/watch?v=AsgB9eBl58I https://www.youtube.com/watch?v=PnU-SY6egr4 https://www.youtube.com/watch?v=zMok2y05jNE
__________________
2008 4.8i Black with Tabacco. Black Y-spoke wheels and shadowline trim. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
