What is this?! Side mirrors

[Qsilver7]

Originally Posted by andrewwynn

Anybody have a link to a good how to on swapping the mirrors? My aspherical mirrors came in and I'm jonsin' to get them installed.

Here ya go...this info should also be on the new BMW TIS website. Click this link, enter your vehicle info, then type "replace mirror" in the search box: https://www.newtis.info/tisv2/a/en/


I do recommend removal being done in a warm environment (if at all possible). If the ambient temps are cold...the plastic may be more prone to cracking breaking vs trying to remove the mirror in warmer ambient temps. so just be cognizant of the amount of force you use if the ambient temps are cold.

[andrewwynn]

I had to remove the backer plate to make a mod to the backer plate to fit the knockoff mirrors but with two cars it was a cost difference of about $140 it was worth the effort.



I had to cut the tabs down (marked in blue) see the other three already cut down.

It was a bit of a MFr to pull that backing plate off and push back on but worth the effort.



Installed. Very nice not going back. The knock off mirrors are plastic not glass so the refection is not as crisp but very ok. Acceptable trade off but with deeper pockets I'd recommend finding glass / oem.

[Qsilver7]