|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-13-2015, 11:53 AM
|
||||
|
||||
|
I have a facelift and I didn't have to move or remove my headlights at all to replace the bulbs
__________________
 ***The post above should be taken as the opinion of THE VEIN and should not be viewed as a representation of XOUTPOST.com***
|
|
#2
11-13-2015, 02:49 PM
|
||||
|
||||
|
Quote:
Quote:
__________________
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral.
|
|
#3
11-13-2015, 04:01 PM
|
||||
|
||||
|
Quote:
__________________
***The post above should be taken as the opinion of THE VEIN and should not be viewed as a representation of XOUTPOST.com***
|
|
#4
11-13-2015, 06:09 PM
|
||||
|
||||
|
Quote:
I could access the AE bulb and the halogen lamps in the inner section (closest to the kidney grills)...but to get to the screws that held the section on were you access the HID bulbs...the headlamp would only slide out to where they hit the headlamp washers....and that was it. No amount of turning and manipulation got them past the washers. You must be a better man than I.  For example...the 2 torx screws on the bottom (see the 2 bottom arrows in pic below) are really difficult to remove if the light assembly isn't removed from the vehicle...and you can only get to the DS2 (HID) bulb when the 4 torx screws are removed along with the cover that protects the bulb: (images below are from TwinsPoppa's DIY on xoutpost)  You can see the HID bulb location in the pic below with the cover removed 
__________________
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral.
Last edited by Qsilver7; 11-13-2015 at 06:19 PM.
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
