PA soft 1.4 windows 10

[Adorian]

Can you help me with a link ? Thanks

[yes_its_neil]

1.4/1.4.0 Car Diagnostic Scanner Scan Interface Programmer Read Code For BMW E38 | eBay

[Adorian]

Does it works on windows 10 ? Can i activate some functions with this program like the day light runing or stuff like this ? Thanks i am sorry if i ask to many questions but i am new with this stuff

[Overboost]

This was the reference I used to make it work on Windows 10.

PA Soft 1.4 FTDI drivers for Windows 10

[E53cruiser]

ive asked already but can this be used with a 4.8is??!!

[Ricky Bobby]

Is coding easier with BMW Scanner 1.4 as opposed to NCSExpert? I already have the Romanian software suite

[Overboost]

Originally Posted by Ricky Bobby

Is coding easier with BMW Scanner 1.4 as opposed to NCSExpert? I already have the Romanian software suite

The user interface is much easier with PA Soft 1.4 but it is limited compared to NCS Expert. I have both. One thing the PA Soft allowed really easily was the LCM EEPROM programming of the VIN and mileage to match my cluster and clear the tamper dot when I upgraded to a C36 SW4.0 unit to get the triple blink feature. But I use NCS Expert to enable all those functions like brake force display, euro double impulse hazards and triple blink (which I have now programmed as 5 blinks). PA Soft has a little easier functionality and it is the first program I open and check when coding something and at under $30.00 for module and cable, it should be in everyone's tool box. It has its advantages for sure.

[Ricky Bobby]

^^Can you pm me on how to code the triple blink turn signal feature? Something I always wanted to program on mine with NCS Expert but I have no clue how to do it or what lines to look for! I also have a few things I want to code that I forgot about a few years back -

Sounds like I am good to go with my Romanian suite but thank you for letting me know -

[Overboost]

Originally Posted by Ricky Bobby

^^Can you pm me on how to code the triple blink turn signal feature? Something I always wanted to program on mine with NCS Expert but I have no clue how to do it or what lines to look for! I also have a few things I want to code that I forgot about a few years back -

Sounds like I am good to go with my Romanian suite but thank you for letting me know -

Ricky Bobby, I am not sure the E53 has this option. My E46 needed a 2006 LCM to get the CYCL_TI_BLK parameter. I just looked in my daten files for the E53 and the latest LCM I have is C24 and I don't see that parameter in the list. Let me do some digging, I would love to program this on my E53 too.

[Adorian]

I have a x5 e53 2002 3.0d 184 hp and i dont have the turn signal blinking 3 times, can any one tell me if i can activate it ? and how to activate it with ncs expert for now. My bmw scaner 1.4.0 will arive in one month because i`m from romania.

Thanks