Cluster Brightness

[Rosssavage]

To remove light switch, first remove air vent above it (gently pry it off).

You'll find two Phillips head screws under there - undo them, lift the switch up a tiny bit and pull it straight out.

The wiring is short, so you may have to pull the plugs to get at it properly.

The light switch is directly attached to the LCM, but it can be removed - can't remember exactly, but it basically pulls away (there may be some plastic clips to work out)

Are they aftermarket / upgraded headlights?

My dash illumination brightness control goes wrong every time I turn on my cheapo Chinese head unit. With the stereo on, everything goes to max brightness regardless of rheostat position. As soon as I turn the stereo off, normal operation is resumed.