|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-26-2016, 03:17 AM
|
|||
|
|||
Help! stalling out
EDIT: FIXED. INTAKE HOSE CAME LOOSE
Hi guys, I have an 02 X5 3.0. The car stalls out as soon as I turn it on. The RPM's bounce a little and then the car completely dies out, the DSC light comes on and gives me a "engine failsafe prog" I pulled the following codes: E3 Fuel trim bank 1, permissible range exceeded E4 Fuel trim bank 2, permissible range exceeded D3 Idle-speed control valve, mechanical fault EE misfire, Cylinder 1 F2 misfire, Cylinder 5 F0 misfire, Cylinder 3 F3 misfire, Cylinder 6 EF misfire, Cylinder 2 F1 misfire, Cylinder 4 08 Signal, air-mass flow sensor 91 CAN torque reduction Any help would be appreciated 
Last edited by vanondemand; 03-26-2016 at 04:40 AM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
