|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#8
|
|||
|
|||
|
Ok I'm getting no where at all. Actually my issue got worse but I bought some software to pull some codes so hopefully someone can help steer me in another direction.
So far I've replaced the actuator and the entire door wiring harness. That did nothing to help the issue. After that happened and didn't work I ordered a new drivers side window switch panel and installed that and still i have the following issues: -drivers window is the only window that I can roll down from the drivers switch, but the auto up down feature does not work. -only the drivers side mirror can be controlled from that switch panel as well. The passenger mirror does tilt in reverse though. -each window does work properly from its individual switch. -drivers door lock still inoperable. Can only lock and unlock with key. -the truck thinks the door is always shut. I can turn the truck off and walk away, come back an hour later and open the drivers door and roll the window up and down without the key in it. -the interior light doesn't come on when opening the drivers door, obviously this goes hand in hand with the truck thinking the door is constantly closed. Here are the codes that I pulled after clearing everything out and running the truck for a few days. The weird thing is that these codes are showing passenger door issues but I have no clue why that would affect the drivers door stuff. A7 (167) mirror, potentiometer horizontal or cable, passenger door "showing fault currently not present" A6 (166) mirror, potentiometer vertical or cable, passenger door "showing fault currently not present" A2 (162) Open circuit mirror heating or cable, passenger door "showing fault currently present" Shadow A0 (160) Repeat blocking central locking activated "showing fault currently not present" 93 (147) power up from the GMIII "showing fault currently present" 95 (149) power up from the passenger door module "showing fault currently present" Please give me some guidance guys. I'm going crazy and broke chasing this issue, but now I'm so deep that I have to keep going otherwise I just threw $600 in the trash. |
| Bookmarks |
|
|
|
|