|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#23
|
||||
|
||||
|
The relay is on the door where the window isn't working. If you show me a pic of the bottom and any model number on the relay I can tell you where to test to confirm the relay is the problem vs a switch or electronics.
edit: your photo had the part # on it: tyco+ V23078-L1002-A303 It's a special relay that reverses polarity to the output terminals, shorting both to ground when not operational. The small pins on the ends are the control pins; if you can plug it back in and test it, you should have voltage on the small pins when the switch is activated (up/down). one side for up one for down. If you get a '12v' reading across the small pins on both sides, the switches are fine and the relay is shot. If you don't get voltage on the control pins then there is a switch or wiring problem. If you get voltage and the relay does click then it says the problem is down-stream; limit switch or wiring, but i think you said no click in the down position.
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) Last edited by andrewwynn; 12-02-2017 at 07:30 PM. |
| Bookmarks |
|
|
|
|