06 4.8 N62 AGA coolant pipe install - in Process

[Motorsport1207]

Just wanted to drop a few lines on my current progress of the AGA pipe install. Just install the pipe this afternoon and tighten

I am very impressed with the AGA pipe. Good quality engineering.





Sent from my iPhone using Tapatalk

[bmw540san]

Pretty much everything from AGA is top notch, well engineered and tested product which demands high price.
Than you have people complaining about the price instead of complaining to BMW for producing inferior part.
You should be set now after install.

[twinspool]

nice!

this helps me with my decision making..

[Motorsport1207]

Completed the valley pan, coolant pipe and both banks valve gaskets with spark plug tubes replacement. Very happy with work and parts. On my 1200 mile of 2500 mile road trip after repair and no issues engine temp 217-222F.

Don’t forget to pressure your coolant system before you install the intake manifold. I pressure test mine at 16 psi over night 12 hrs and lost 1 psi.

Ted


Sent from my iPhone using Tapatalk

[Csoerensen89]

How many hours of work does that job require ?
I am thinking about doing that, including the valve cover gasket, even thought I don’t have any issue, just to feel better, and give the x a cookie.


Sent from my iPhone using Tapatalk

[Motorsport1207]

Originally Posted by Csoerensen89

How many hours of work does that job require ?
I am thinking about doing that, including the valve cover gasket, even thought I don’t have any issue, just to feel better, and give the x a cookie.


Sent from my iPhone using Tapatalk

I did this work over 3-4 days for a total of 12-15 hrs. I checked and rechecked. Not bad, just need to take your time.


Sent from my iPhone using Tapatalk

[Csoerensen89]

Btw mine is a 4.6 but I assume it is approximately the same job


Sent from my iPhone using Tapatalk

[BigBlack48is]

Way to keep it clean!!! I work the same way

Can I suggest putting a lower pressure cap on after you put it back together. I truly believe it has saved me from this job and will continue to do so for years to come!

MotorSports1207 how many miles do yo have on the clock?

[Motorsport1207]

Originally Posted by BigBlack48is

Way to keep it clean!!! I work the same way

Can I suggest putting a lower pressure cap on after you put it back together. I truly believe it has saved me from this job and will continue to do so for years to come!

MotorSports1207 how many miles do yo have on the clock?

125k


Sent from my iPhone using Tapatalk

[twinspool]

@bigblack48is - where can one acquire this said lower pressure res cap? and is it BMW?