Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
lots of codes... advice on where to start. lots of codes... advice on where to start.
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 06-08-2018, 11:35 PM
Member
  
Join Date: Mar 2018
Location: Here, hi
Posts: 35
Jaegze is on a distinguished road
Thank you for the follow up. I did end up finally getting a reading at the schrader valve and it was about 54. So that is good.

I went through and cleared the codes again and the maf and cam position sensor came back up.


I’ll look into the vct solenoid and go from there.

I see there are generic tests for cam sensor by seeing if it send me any signal. Do any of these work on these sensors or any test that anyone knows of.
Reply With Quote
 

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 06:57 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.