Turning off turn signals as park lights?

[Overboost]

I have a ModLight2 laying around here and when I set the Unlock Welcome Lights (keyfob unlock command) set to selection A if fires up the halos (listed as parking lights) for a selectable amount of time and then follows with a turn signal 1 second flash at the end of the time selected.

When you unlock your car by clicking Unlock button on the remote key it starts function “Unlock Welcome Lights” which will make one of the following:
a) starts parking lights for 10/15/20/25 seconds and at the end it adds the turn signals too for 1 second.

From this I know there is a separate iBus command to fire the halos only so the message is already deciphered and working. I have sent Svet an email requesting adding an ignition on command to send that halo IBus message and will see if he is willing to oblige my request. I offered to share in the development costs.

I also ordered his USB IBus interface and with it connected to a laptop running Navcoder, I should be able to identify that IBus message and also send that message onto the IBus with the Navcoder software but I cant keep a laptop running in the car so without a dedicated device to that can send that message, it is pointless. That's why I asked him since he already has the dedicated device for sale. I just need that menu option.

Here are some videos when I was first playing with his ModLight2. Some of it simple eye candy but some things were nice to have like cornering lights and triple blink turn signals which I changed to 5 blinks like my E46 LCM.

https://youtu.be/xlHAM-6XOmY

https://youtu.be/gZB_rP3emkw

https://youtu.be/bMMHguuhZYw