|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Suspension help please
The problem is the back end is low front end looks high and the system will not 0ut air in the back or operate on the raise lower controls. Does anyone have any ideas as to the problem, no faults showing on the display so I am wondering if the EHC2 module is faulty or should I be looking elsewhere. Need my car to get to work over 30 miles so can’t use a taxi, getting to the point of having to buy a runaround if I can’t sort it. Any help would be appreciated Thanks |
Sponsored Links | |
|
#2
|
|||
|
|||
When mine did that, I had Inactive error message and the problem was two fold. Compressor was dodgy causing one of the very large fuses to pop. After replacing compressor and fuse, Indy reset the system and all was well.
__________________
2004 4.8iS Check out the BMW CCA X Chapter on Facebook - https://www.facebook.com/groups/603822583674050/ |
#3
|
|||
|
|||
I have replaced the head and seal so pump is working good, was yours all round suspension or just rear, the reason I ask is the systems are totally different, fuse position and module type
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|