|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#29
|
||||
|
||||
|
And all in. So freaking easy I can't believe I was so nervous about replacing them. The HF support bar works perfect on the 3.0L on the single bracket up front only. In short once the engine is lifted, you need another .25"-.5" additional clearance to get the studs of the mounts clear from the brackets once the mounts are moved out of the pockets on the subframe.
On the right side I just loosened the bracket from the engine and that one came right out. Pull it out towards the front. On the left side I just loosened the 3 subframe mounting bolts on the left and didn't even touch the 3 on the right side. I flexed the left side down a little with a pry bar and the mount came right out. Pull it out to the rear. Since the job took 2 hours from raising the X to having it sitting back on new mounts, and the reinforcement plate is out I am going to replace the oil level sensor I ordered previously so off to the auto parts store to get some oil and a filter. I'll edit the steps in this thread:
__________________
Digital Competition Systems The older I get... The faster I was... No Fear
Last edited by Overboost; 02-03-2020 at 08:22 AM. |
| Bookmarks |
|
|
|
|