|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
2003 3.0i. PDC . button not working.
Garage: - 2003 E53 X5 3.0i sport - 2017 F15 X5 xdrive35i - 2018 F15 X5 xdrive35i |
Sponsored Links | |
|
#2
|
|||
|
|||
What is it doing/not doing? Are you trying to use it while driving at speed?
__________________
2004 4.8iS Check out the BMW CCA X Chapter on Facebook - https://www.facebook.com/groups/603822583674050/ |
#3
|
|||
|
|||
It won’t beep when i am nearing an object.
|
#4
|
||||
|
||||
When you start the car does the PDC have a long 3 second beep and a flashing PDC button? If so, you need to scan the sysytem and see what is complaining. If you don't have a proper scanner, go and listen to each sensor and see if they are clicking when you place your hand over the sensor. (You need to place your ear 1-2" close to each sensor)
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
#5
|
|||
|
|||
The button won't work at all. It won't even engage in reverse. No lights appear. Im not sure what to do, but just replacing the system.
Garage: - 2003 E53 X5 3.0i sport - 2017 F15 X5 xdrive35i - 2018 F15 X5 xdrive35i |
#6
|
||||
|
||||
Complete failure sounds like the control module in the rear. Get back there and make sure the wiring is correct and no water damage.
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
#7
|
|||
|
|||
PDC should activate automatically when you put it on reverse. You need to check it with proper diagnostics. Though now that there isn't even the warning for faulty system by flashing light I would first check fuse F6 (PDC module supply) and if that's OK also check that the module is still connected.
https://www.newtis.info/tisv2/a/en/e...0d-sav/Upks4HH |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|