|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#11
|
|||
|
|||
“ Once normalization has been learned (learnt)...then the auto-up/auto-down should be initialized. The procedure below is written for the "rocker/toggle" window switches before BWM switched to the "flip-up/push-down) type installed in the e53...just extrapolate the open & close position of the old switches to the new type for reinitializing the e53's window switch:” So, I understand it to be the auto up/down in a single switch was not available in the e38 e39 models. Those models I believe had one switch for each. That is the only difference. |
Sponsored Links | |
|
#12
|
|||
|
|||
Reset procedure
[QUOTE=Dittmann;1179276]Hi, there are notes between pages one and two that state
“ Once normalization has been learned (learnt)...then the auto-up/auto-down should be initialized. The procedure below is written for the "rocker/toggle" window switches before BWM switched to the "flip-up/push-down) type installed in the e53...just extrapolate the open & close position of the old switches to the new type for reinitializing the e53's window switch:” So, I understand it to be the auto up/down in a single switch was not available in the e38 e39 models. Those models I believe had one switch for each. That is the only difference. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|