|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#15
04-17-2021, 09:31 AM
|
||||
|
||||
|
You need 3-5 70mm m14 bolts to hold the old rotor to the hub.
Pipe flange should hold the force but you would have to drill it out for 1" bolt to fit through as pipe thread is not the same as a bolt. You can use a 7/8" bolt and 1" flange. The beauty is: you don't have to just use the bolt + turn: once you snug it good and tight, hit the bolt with a hammer. Tighten, hit, repeat as necessary.
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) 
|
| Bookmarks |
|
|
|
|
Threaded Mode
