IHKA Assembly /blower motor assembly house removal (mini tutorial)

[Bmwe5320023.0]

CN90
Buddy this car is about 400 000 km I think, lol! No wonder the blower was out! Agreed, absolutely atrocious design!

Magister88
I'm not sure I understand your question about panels.
Everything is removed now. As for a, b and c pillars, I'm reupholstering them with red and black diamond material.
I also made a huge project for the headliner. I reinforced it with fiberglass and then reapholstered it with the same black and red diamonds. I then fed 450 fiber optics through it. It looks amazing but too early to show off. Gotta get all interior done first.

My new carpet is ready. I cleaned it a few times with a drill brush. You will see little marks, I wasn't careful and the plastic side of the brush did damage is slightly.
It won't be much visible after install.
I just added a couple of layer of carpet paint to make the black color pop more. Then I'll go at it with a brush again, to separate whatever fibers got stuck because of the paint.
In the meantime I'm finishing soundproofing of the floor and firewall.
Firewall is a pain to get under stock soundproofing, all wiring along the firewall has to come off.