|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
09-10-2021, 04:04 PM
|
|||
|
|||
|
CAN Bus Interpretation
Good afternoon everyone,
I’m currently working on a long-running project of a performance dash for the E53, although I’ve reached an impasse. According to what I see on the wiring diagram, I am missing the CAN pins on my OBD port(which are on 6 and 14) and have the K-Line pins (7 and 8) yet the wiring diagram says the can wires are YlwBlk and YlwBrw which are the colors of the wires in pin 7 and 8. My CAN bus interpreter for my raspberry pi cannot read any data from 7 and 8 (which could be up to the setup of my CAN bus tool) which makes me think I don’t have CAN, yet BMW scanner 1.4 was giving me all kinds of messages about the CAN bus having been interrupted after I had hooked the interpreter up to it. This brings me to my questions. 1) Does the E53 (2005) have CAN bus? 2) Can it be interpreted in any way (I.e is it encrypted)? 3) What wires are 7 and 8 actually? 4) Is there a way for me to only connect to certain CAN busses (since I know all the different modules communicate using it, and I really only need the DME)? Thanks in advance for any help! Sent from my iPhone using Xoutpost.com
__________________
2005 X5 E53, 167k Miles: Kenwood DNX893S Head Unit, Mud Flaps (Rear Only) , Rim Shopping(WIP), Full Spectrum RGB Halos, 
|
| Bookmarks |
|
|
|
|
Threaded Mode
