EHC issues and 2nd intro

[Clavurion]

If you have xenons with auto leveling the rear right sensor has 6 wires and separate circuits for both EHC and xenon leveling. The left side sensor has only one circuit so you can't swap them like that.

[Shane2jz]

Originally Posted by Clavurion

If you have xenons with auto leveling the rear right sensor has 6 wires and separate circuits for both EHC and xenon leveling. The left side sensor has only one circuit so you can't swap them like that.

I suspect that may be the case for 2 air axle vehicles, but not on mine. I have Xenons yes, but there is a separate level sensor for those, RH front. How do I know? Because it failed last winter and needed replacing before I could get it through the MOT as the beam was way out for the test.

In the meantime, here's a short video that possibly explains the EHC problem better.
https://drive.google.com/file/d/1MJF...ew?usp=sharing

Edit: Just found this and it could bre just what I need: https://www.pngegg.com/en/png-hkiqr Will take another look tomorrow.