If I'm not mistaking you can just add a 5ohm resistor to the connector like jumper,I had to disable a lot of knee bolster airbags in dodge mini vans when installing hand controls for the disabled. That way the airbag light doesn't come on. Should be the same for any vehicle I assume.
Quote:
Originally Posted by zuvarak
Haven't had the time to deal with this due to engine issues.
I'll give another scanner a go in order to get a more precise error on this problem. If I understood correctly, then in case the front door airbags deploy, the crash details will be stored into the module, which will need replacing. If that's the case then I'll have a look around in the local scrap yards, I've found plenty 2nd hand modules on sale for low bucks.
I've also heard that it might be not possible to deactivate driver's airbag and I'll have to get a replacement airbag anyway..not sure if that's true.
|
Sent from my SM-G781W using
Xoutpost.com mobile app
02-11-2022, 08:55 PM
2003 bmw x5 3.0i ,219000km build date 2003-08-18
Threaded Mode
