08-02-2022, 12:08 PM
|
 |
Member
|
|
Join Date: Jun 2014
Location: SA, TX
Posts: 6,474
|
|
Quote:
Originally Posted by X5chemist
How hard is it to replace the tie rod assembly? The subframe is back on. I left tie rods off my list. With a dealer alignment coming up, the tie rods should be replaced to finish the X5 lifetime. If difficult, at least the outer rods can be replaced.
|
One of the easiest suspension repairs there is. As long as you have a wrench big enough to get around the inner tie rod, it's easy. I usually use a big plumbers wrench. Never had the ball joint on the outer seize in the knuckle though... so that could slow you down slightly. Nothing a persuasive hit from the BFH or blue tipped wrench wouldn't cure though.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)
2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)
2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
|
Threaded Mode
