Help with errors

[SirHiss]

First time using INPA. I have 2 problems that I'm trying to diagnose. Airbag light stuck on and right headlight does not move up or down on startup. (Can't pass MOT with these so can't currently drive the car. )

First I scanned the airbag fault and found this:





I had no idea what a BST was so did some googling. Now I know! I had connected a CTEK charger adapter to the BST not realising what it was, so I moved it to the actual battery terminal instead, hoping this was the issue. I then tried clearing the code/light but it comes straight back! I don't know what to do now.

Ok, onto the headlight issue... I tried to access the vertical headlight aim control in INPA and got this:





Searched this but have not come up with much. Is the vertical headlight control done from within the LCM IV? I believe it is a separate module on older cars. Is that why It cannot be accessed here? And if that's the case, is my LCM buggered again?! It reports no errors itself.

Could 193 errors with the ALC be the problem?



Would this be part 63126939069? Where is it located? I'm reading about this being for adaptive headlights that move horizontally but my car does not have that.

Not sure where to go from here. Any help would be appreciated.

I have attached a txt file of the full INPA scan of my car. Perhaps someone could tell me what else I should be concerned about!