clearing codes

[withidl]

NO TOOL IS NECESSARY! The following instructions from another site will electronically reset the service indicator lights by using the "Trip Odometer" stalk in conjunction with the ignition key:

- Ignition OFF (POS 0)

- Press and hold the trip odometer button while turning key to position1 (ACCESSORY)

- Keep the button depressed (about 5 seconds) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display.

- Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service.

- Press the button again and hold for approximately 5 seconds until "Reset
or "Re" flashes.

- WHILE THE DISPLAY IS FLASHING, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 seconds.

NOTE: If the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.