|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#4
04-07-2006, 10:49 AM
|
||||
|
||||
|
Starting to look like the Porsche Pepper Shaker
 Looks good
__________________
An unwavering defender of those I see worth protecting. "promote the general welfare, not provide the general welfare" We the People of the United States, in Order to form a more perfect Union, establish Justice, insure domestic Tranquility, provide for the common defence, promote the general Welfare, and secure the Blessings of Liberty to ourselves and our Posterity, do ordain and establish this Constitution for the United States of America. 
|
|
#5
04-07-2006, 10:49 AM
|
||||
|
||||
|
Quote:
Yes, i also have the roundel)propellers
__________________
... thank you X5world! Last edited by iop9000; 04-07-2006 at 11:12 AM.
|
|
#6
04-07-2006, 11:30 AM
|
||||
|
||||
|
hmmmmmmmmm.........
very interesting. i may have to do this. where did you get the paint? pep boys, murray's or auto zone? Thanks.
__________________
"Breathe, Stretch, Shake, Let it go." "You'll be my dirty little secret." Want info on becoming a Premier Member? Click Here Visit my very own X5world X page! Newer SRT8 page 
|
|
#8
04-07-2006, 12:09 PM
|
|||
|
|||
|
Caliper Painting 101
If you're interested: You'll need 0000 steel wool, brand name VHT (Very High Temperature) caliper paint (it's made specifically for calipers and comes in silver, red, black and yellow). You'll also need a roll of scott towels, a spray bottle of water, a can of 3M brake cleaner and maybe a wire brush.
Jack the X. Take off the wheel. Clean the caliper using the brush (I also use an old paint brush to dust off the brake dust before I start). Tear off several pieces of paper towel. Spray a little water on the towels so they're damp and 'sticky' and drape the towels around the caliper, essentially outlining the caliper. Tear off a few smaller pieces of paper towel, spray on a little water and wedge into the openings on the front side of the caliper (three openings). Paint only enough to coat the caliper for now. Then, while waiting for the first coat to dry, clean the inside and outside of your rims. Hey! Why go through all this bother if you're going to put a dirty wheel back on the X? Now hit the caliper with some more paint. Now, the fun... Chock the wheel, then place the X in neutral. Take off all paper towels and don't forget to remove the wedged pieces (I use needle-nosed pliers to remove the wedged pieces). Turn the rotor so the overspray is accessible. Use the 0000 steel wool and "wipe away" the overspray. You can also use the 3M to clean it up even more. Put the wheel on and move on to the next wheel. Now the hard part is not driving the X for a while in order to give the paint a chance to harden (~3-4 hrs). I have found the VHT paint can last for several months (3-4). Also, another point, when you clean your X, don't use a spray-on wheel cleaner on the painted calipers. It has a tendency to dull the finish. I use a stiff brush and some of the soapy water left over from washing. PS - The two pot calipers painted RED on my 4.6 look massive against the black sapphire body. Enjoy!
|
|
#10
04-07-2006, 12:34 PM
|
||||
|
||||
|
Iop, those calis look
fine! Amazing how rusted your cals were...soaking in saltwater puddles?! BR,md
__________________
Ol'UncleMotor From the Home Base of Pro Bono Punditry and 50 Cent Opins... Our Mtn Scenes, Car Pics, and Road Trip Pics on Flickr: http://www.flickr.com/photos/4527537...7627297418250/ http://www.flickr.com/photos/4527537...7627332480833/ http://www.flickr.com/photos/45275375@N00/ My X Page 
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
