Can I do this??...I think I can, I think I can..

[mdk5623]

Just ordered Centric rotors and Axxis Deluxe Plus pads for the X from Zeckhausen....I've changed my own oil for years, baked my headlights, dremeled the hell outta my cluster and changed my pads on an old '86 325e....Got a bit of a panic/cold sweat when I think about doing all rotors and pads and sensors on the X, however. I've read the great DIY by Hayaku and Kewl, seems straightforward....Can I do this without f**king it up? Lemmeno your thoughts/suggestions, pulleeze...

[JV]

Brakes and rotors are easy as long as you have a good jack/jack stands and even easier with a lift. It's a greasy job, but pretty easy.

PM me if you run into troubles, I did mine about a month ago.

[hayaku]

or pm me and i'll give you my number.. i can walk you through it if you need

[AutoXer]

It's not much different than from your '86 325. Go for it!

[iop9000]

you can do it!

[chroniclivin]

u got it man its tit, just clean everything real well, i did mine there mint, 01 x5 3.0, only prob i had was getting the old rotors off, just wack em man wack em, good luck!

[alpac]

Go for it and if you run into problems post a question in this forum and there will be tone of people to help you. Good luck

[X5Ghost]

be gentle with the sensors, they break easy.

[rayxi]

Go for it. Make sure you have the right sized hex bits for the calipers and rotors.

[chroniclivin]

yea there like a 7mm sears has got em vip and those place prob don't my didn'nt and i got new sensors on our fav bidding spot for 10 bucks each, recommend u get them, u can make it work without them and order later thats what i did, good luck!