|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-23-2010, 11:30 PM
|
||||
|
||||
code P1351
This is what came up on my obd-2 manufactor Controlled ignition system or misfire . Can anybody help me with promblem ? While driving my ses light came on , all of a sudden I lost power in the xs.thank god I was able to make it home. What is it that I have to do to fix this problem? A respond is need . Thanks!
|
|
#2
11-23-2010, 11:44 PM
|
||||
|
||||
|
I had this problem, but it went away after restarting my car, I scanned it with the GT1 and found #4 ignition coil misfire, I bought two spare coils just in case it happen again, I will have the parts ready.
__________________
We never have problems, we always need solutions
|
|
#3
11-24-2010, 04:53 AM
|
||||
|
||||
|
Sounds like your timing was retarded. By any chance, did you just fill up right before this happened?
__________________
---------------------------------------------- 2006 X5 3.0L - Schwarz Black/Truffle Brown Stock But I keep it clean 
|
|
#4
01-03-2011, 10:03 PM
|
|||
|
|||
|
Quote:
wife just put gas in the car 2 days ago from Kroger 
|
|
#5
01-03-2011, 10:35 PM
|
||||
|
||||
|
Did the SES light come on at warm-up/start-up?
I thought I read somewhere the computer did something automatically like this for vehicles that have the intermediate levers issues. I could be confusing it with another issue though. Oops. Just re-read your post and it came on while driving. You also might want to check the plugs - might be bad. Last edited by TwinsPoppa; 01-03-2011 at 10:40 PM.
|
|
#6
01-03-2011, 10:37 PM
|
||||
|
||||
|
If memory serves that would be misfiring on cyl 5 and cyl 1. Coils don't usually fail in pairs, so I'd clear the faults then drive it until it happens again too see what cylinder is currently dropping out. Then if you want to isolate it to the component responsible swap the coil to a different cylinder to see if the fault follows the coil or stays in the same hole.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#7
01-03-2011, 11:18 PM
|
|||
|
|||
|
Quote:
the SES light comes on maybe 20 seconds after warm up. I don't know about the X5, but on my e46 i had 2 bad coils at once. I will try the reset/manual process you suggested. PS - is coil 1 at the radiator or firewall?
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
