Homelink stall in UK spec X5

[Andrew Campbell-Laing]

Hi All I have been tackling installing a Homelink Garage door opener, and there is definately not a "little White connector" up there at all, had a good root around and can see nothing. I know there are some people that have "tapped" into the existing lighting circuit to power up their homelink and was wondering if any of you could let me know which wires were used to which pins?

cheers
Andrew

[Wagner]

Could you give a little more information? Are you installing a garage door opener or asking how to configure Homelink?

[Andrew Campbell-Laing]

I am trying to physically install the homelink garage door opener. In Europe the car is not pre-wired as in the US so there is no connector and I need to tap into existing wire loom to get the device powered up. Looking to see if anyone else in Europe has done this and if so what wires did they use.

Andrew

[andywilson23]

hi, i have a 2006 3.0d lemans sport. i have installed homelink. The cable was taped to a wire loom above the drivers head, had to remove light fitting to access it.

[Andrew Campbell-Laing]

Mine is a 2003 3.0 Sport and I have searched the entire area and couldnt find it. I even removed the lights above the visors and still cannot find it.

Andrew